3612 and 3616 Engines Caterpillar


Engine Oil Filters

Usage:

3616 1PD



Ilustrasi 1g00682448

Filter Oli Engine

(1) Filter oli engine

(2) Katup ganti filter oli engine

Filter oli engine (1) terdiri atas enam buah elemen filter oli yang dapat diganti. Terdapat dua buah kumpulan elemen filter yang terdiri atas tiga buah elemen filter di masing-masing kumpulan. Masing-masing kumpulan mempunyai port pipa saluran pengeluaran untuk mengeluarkan udara untuk pengosongan dan untuk pengisian.

Katup ganti filter oli engine (2) memungkinkan filter pada masing-masing kumpulan diganti secara terpisah saat engine masih bekerja. Elemen filter oli harus diganti pada interval setiap 1,000 jam. Elemen filter oli harus diganti sewaktu indikator pintas filter oli mencatat adanya penurunan tekanan sebesar 100 kPa (14,5 psi). Penurunan tekanan diukur pada filter ketika engine berada pada temperatur kerja dan ketika engine berjalan pada tetapan kecepatan.

Dari filter oli engine, oli kemudian mengalir melalui katup prioritas ke dalam galeri oli dan ke dalam blok silinder.

Caterpillar Information System:

3612 and 3616 Engines Engine Oil Coolers and Temperature Regulators
3612 and 3616 Engines Centrifugal Oil Filters
723PLUS Digital Speed Control Initial Adjustments
3176C and 3196 Industrial Engines Alternator and Regulator
2000/06/01 New Pump Group With Improved Internal Sealing Used In Hydrax System {1289}
3126E Truck Engine Pistons and Connecting Rods - Remove
723PLUS Digital Speed Control Conclusion of Setup Procedures
3612 and 3616 Engines Turbocharger
3612 and 3616 Engines Fuel System Operation
3126E Truck Engine Flywheel - Install
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Torque Limit Switch Circuit - Test
G3500B Engines Electrohydraulic Oil Pressure - Measure - Adjustment Procedure
3126B Engines Engine Speed - Check
988G Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Flash Program
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Front) - Time
3612 and 3616 Engines Internal Lubrication
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Starting Aid Switch Circuit - Test
P16, P20, P25, P28, P40 and P60 Pulverizers Rotary Manifold - Assemble
3500B High Displacement Locomotive Engines Air Inlet and Exhaust Lines
3612 and 3616 Engines Piston Cooling Jets
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Test
Uninterruptible Power Supply (UPS) 250 System Description
3612 and 3616 Engines Lubrication System Operation
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Service Brake Pedal Position (Switch 2) Circuit - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.