Cab - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Bracket | 4 |
- Attach Tooling (A) and a suitable lifting device to cab (29). The weight of cab (29) is approximately
430 kg (950 lb) . - Install cab (29). Install bolts (30). Repeat for the rear of cab (29).
Show/hide table
Illustration 3 g01162642 - Connect hose assemblies (28) to the bottom right side of cab (29).
Show/hide table
Illustration 4 g01162637 - Install panel (27) and install bolts (26).
Show/hide table
Illustration 5 g01162635 - Connect harness assemblies (22), (23), and (24) with bolt (25).
Show/hide table
Illustration 6 g01162625 - Connect harness assembly (21) and install all cable straps.
Show/hide table
Illustration 7 g01162621 - Connect hose assemblies (20).
Show/hide table
Illustration 8 g01162620 - Connect air conditioning hose assemblies (18) and (19).
Show/hide table
Illustration 9 g01162617 - Connect hose assemblies (17).
Show/hide table
Illustration 10 g01162603 - Connect harness assembly (15) to horn (16). Connect harness assembly (13). Connect hose (14).
Show/hide table
Illustration 11 g01162585 - Connect six hose assemblies (11) and four hose assemblies (12).
Show/hide table
Illustration 12 g01162571 - Pull heater hoses (9) and (10) through the bottom of the cab. Connect heater hoses (9) and (10).
Show/hide table
Illustration 13 g01162563 - Slide frame assembly (7) for the seat rearward. Install bolts (8). Repeat for the other side.
Show/hide table
Illustration 14 g01162436 - Position throttle cable (5) and tighten nut (6). Install pin (4) and cotter pin (3) in order to connect throttle cable (5).
Show/hide table
Illustration 15 g01162577 - Install panel (11) and install bolts (2).
- Charge the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the correct procedure. Refer to Special Publication, NEDG5065, "Air Conditioning Tools" for the correct tools.
- Fill the hydraulic oil system. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
- Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Show/hide table
Illustration 1 | g01162645 |
Show/hide table
Illustration 2 | g01162655 |
Caterpillar Information System:
2005/06/06 An Improved Exhaust Manifold Is Available {1059}
C11 and C15 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
2006/10/30 Using Injector Trim Files {1290, 7620}
C11 and C15 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines CAN Data Link Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Work Tool Control
C32 Petroleum Generator Sets Engine Crankcase Breather - Clean
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Fuses - Replace
305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Remove
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Tool Retaining Pins - Inspect/Replace
345C Excavator Machine System Specifications Boom Cylinder Lines
C15 and C18 Petroleum Generator Sets After Stopping Engine
325C LCR Excavator Machine Systems Fuel Tank - Remove and Install
C7 Engines for Caterpillar Built Machines Piston and Rings
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Carrier Roller - Remove and Install
C4.4 Industrial Engine Fire Prevention and Explosion Prevention
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Roller - Remove and Install
C4.4 Industrial Engine Engine Stopping
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Remove
Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7 Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Install
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track - Separate
2005/05/16 Service Replacement Relay is now Available {4493}