Track Carrier Roller - Remove and Install
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 140-7742 | 套筒 | 1 |
- 松开张紧的履带。 请参阅操作和保养手册, "履带的调整 - 调整"。
Show/hide table
图 1 g01162863 - 将适当的起吊设备和工具 (A) 固定到履带 (1) 上。 使用合适的起吊设备提起履带 (1)。
- 拆下螺栓 (3)，然后拆下履带托链轮 (2)。
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| A | 140-7742 | 套筒 | 1 |
- 安装履带托链轮 (2) 和螺栓 (3)。
- 使用适当的起吊设备和工具 (A) 降下履带 (1)。
- 在履带上施加张力。 请参阅操作和保养手册, "履带的调整 - 调整"。
Show/hide table
| |
| 图 2 | g01162863 |
Caterpillar Information System:
C7 Engines for Caterpillar Built Machines Piston and Rings
325C LCR Excavator Machine Systems Fuel Tank - Remove and Install
C15 and C18 Petroleum Generator Sets After Stopping Engine
305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Install
2005/06/06 An Improved Exhaust Manifold Is Available {1059}
C11 and C15 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
2006/10/30 Using Injector Trim Files {1290, 7620}
C11 and C15 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines CAN Data Link Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Work Tool Control
C32 Petroleum Generator Sets Engine Crankcase Breather - Clean
C4.4 Industrial Engine Fire Prevention and Explosion Prevention
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Roller - Remove and Install
C4.4 Industrial Engine Engine Stopping
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Remove
Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7 Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Install
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track - Separate
2005/05/16 Service Replacement Relay is now Available {4493}
312C Excavator Machine System Specifications Recoil Spring
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Backhoe - Lubricate
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Welding on Machines and Engines with Electronic Controls
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Tool Bushing - Inspect/Replace