An Improved Exhaust Manifold Is Available {1059}
- Excavator:
- 311C U (S/N: CKE1-UP; CLK1-UP)
- 312C (S/N: CAE1-UP; FDS1-UP)
- 312C L (S/N: CBA1-UP)
- 313C CR (S/N: HGF1-UP)
- 313C SR (S/N: WSA1-UP)
- 314C CR (S/N: KJA1-UP; KHB1-UP)
- 314C LCR (S/N: PCA1-UP)
The new 272-4655 Exhaust Manifold is available for replacement of the former 196-8006 Manifold. The manifold is used on 3064 Engines in the machines that are listed.
Certain machines may be configured with a ceramic muffler and used in tunnels. The muffler may create an excessive heat load for the exhaust manifold.
The radius for the corners of the casting is increased. The larger radius decreases the stress in the corners of the casting. The stronger manifold has an increased resistance to cracking.
Caterpillar Information System:
C11 and C15 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
2006/10/30 Using Injector Trim Files {1290, 7620}
C11 and C15 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines CAN Data Link Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Work Tool Control
C32 Petroleum Generator Sets Engine Crankcase Breather - Clean
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Fuses - Replace
305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Remove
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Tool Retaining Pins - Inspect/Replace
345C Excavator Machine System Specifications Boom Cylinder Lines
324D Excavator Safety Messages
305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Install
C15 and C18 Petroleum Generator Sets After Stopping Engine
325C LCR Excavator Machine Systems Fuel Tank - Remove and Install
C7 Engines for Caterpillar Built Machines Piston and Rings
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Carrier Roller - Remove and Install
C4.4 Industrial Engine Fire Prevention and Explosion Prevention
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Roller - Remove and Install
C4.4 Industrial Engine Engine Stopping
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Remove
Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7 Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Install
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track - Separate