Track - Separate
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-9745 | Air/Hydraulic Jack Gp | 1 |
B | 260-9412 | Chain As | 1 |
- Release the tension on the track. Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust".
Show/hide table
Illustration 1 g01162908 - Raise the machine by using Tooling (A).
Show/hide table
Illustration 2 g01163645 - Rotate track assembly (1) until the master pin is on the top position. Place suitable cribbing under track assembly (1).
Show/hide table
Illustration 3 g01163030 - Remove bolts (2) and track shoe (3). Remove bolts (4) and track shoe (5).
Show/hide table
Illustration 4 g01163039 - Attach Tooling (B) and a suitable lifting device to track assembly (1). Remove cotter pin (7) from master pin (6). Use a suitable hammer and a suitable punch in order to remove master pin (6).
Caterpillar Information System:
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Install
Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7 Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Remove
C4.4 Industrial Engine Engine Stopping
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Roller - Remove and Install
C4.4 Industrial Engine Fire Prevention and Explosion Prevention
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Carrier Roller - Remove and Install
C7 Engines for Caterpillar Built Machines Piston and Rings
325C LCR Excavator Machine Systems Fuel Tank - Remove and Install
C15 and C18 Petroleum Generator Sets After Stopping Engine
305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Install
2005/06/06 An Improved Exhaust Manifold Is Available {1059}
2005/05/16 Service Replacement Relay is now Available {4493}
312C Excavator Machine System Specifications Recoil Spring
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Backhoe - Lubricate
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Welding on Machines and Engines with Electronic Controls
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Tool Bushing - Inspect/Replace
Adjustment Procedure for the Accelerator Cable of the Governor Motor{1264, 1265} Adjustment Procedure for the Accelerator Cable of the Governor Motor{1264, 1265}
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Adjuster - Disassemble
2005/06/13 A New Relief Valve with Increased Durability Is Available {5069, 5117}
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Adjuster - Assemble
305.5 and 306 Mini Hydraulic Excavators Machine Systems Front Idler and Track Adjuster - Remove
385C Excavator and 385C Front Shovel Machine System Specifications Hydraulic Pedal Control (Straight Travel)
305.5 and 306 Mini Hydraulic Excavators Machine Systems Front Idler and Track Adjuster - Install