Track Roller - Remove and Install
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 1U-9745 | 气动/液压千斤顶 | 1 |
- 松开张紧的履带。 请参阅操作和保养手册, "履带的调整 - 调整"。
Show/hide table
图 1 g01162908 - 利用工具 (A) 升起机器。
Show/hide table
图 2 g01162909 - 在履带和滚轮机架之间放上适当的支座。 使用工具 (A) 将机器降到适当的支座上。 拆下螺栓 (1) 和履带支重轮 (2)。
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A | 1U-9745 | 气动/液压千斤顶 | 1 |
- 安装履带支重轮 (2) 和螺栓 (1)。 使用工具 (A) 升起机器,拆下履带和滚轮机架之间适当的支座。 使用工具 (A) 将机器降到地面上。
- 在履带上施加张力。 请参阅操作和保养手册, "履带的调整 - 调整"。
Show/hide table
图 3 | g01162909 |
Show/hide table
图 4 | g01162908 |
Caterpillar Information System:
C4.4 Industrial Engine Fire Prevention and Explosion Prevention
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Carrier Roller - Remove and Install
C7 Engines for Caterpillar Built Machines Piston and Rings
325C LCR Excavator Machine Systems Fuel Tank - Remove and Install
C15 and C18 Petroleum Generator Sets After Stopping Engine
305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Install
2005/06/06 An Improved Exhaust Manifold Is Available {1059}
C11 and C15 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
2006/10/30 Using Injector Trim Files {1290, 7620}
C11 and C15 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines CAN Data Link Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
C4.4 Industrial Engine Engine Stopping
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Remove
Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7 Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Install
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track - Separate
2005/05/16 Service Replacement Relay is now Available {4493}
312C Excavator Machine System Specifications Recoil Spring
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Backhoe - Lubricate
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Welding on Machines and Engines with Electronic Controls
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Tool Bushing - Inspect/Replace
Adjustment Procedure for the Accelerator Cable of the Governor Motor{1264, 1265} Adjustment Procedure for the Accelerator Cable of the Governor Motor{1264, 1265}
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Adjuster - Disassemble