Engine Stopping
A motor túlmelegedésének és a motor alkatrészeinek idő előtti kopásának elkerülése érdekében a következők szerint állítsa le a motort: Használati és karbantartási kézikönyv, "Motor leállítása" című rész (működtetési szakasz).
A Vészhelyzeti leállító gombot (ha a felszereltség része) CSAK vészhelyzetben használja. NE használja a Vészhelyzeti leállító gombot normál motorleállításhoz. Vészhelyzeti leállítás után NE indítsa el a motort addig, amíg a vészhelyzeti leállást okozó problémát ki nem javította.
Egy új motor vagy egy javított motor első beindításakor készüljön fel a motor leállítására, ha túl magas fordulatszámot észlel.
Elektronikus vezérlésű motor leállításához szüntesse meg a motor áramellátását és/vagy levegőellátását.
Caterpillar Information System:
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Roller - Remove and Install
C4.4 Industrial Engine Fire Prevention and Explosion Prevention
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Carrier Roller - Remove and Install
C7 Engines for Caterpillar Built Machines Piston and Rings
325C LCR Excavator Machine Systems Fuel Tank - Remove and Install
C15 and C18 Petroleum Generator Sets After Stopping Engine
305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Install
2005/06/06 An Improved Exhaust Manifold Is Available {1059}
C11 and C15 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
2006/10/30 Using Injector Trim Files {1290, 7620}
C11 and C15 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines CAN Data Link Circuit - Test
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Remove
Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7 Supplemental Parts Information for the 330C MH that is Equipped With the 253-3255 Waste Handling Special Arrangement or the 253-3260 Waste Handling Special Arrangement (Cab Riser) {1051, 1055, 1353, 1356, 1360, 1408, 5057, 7
305.5 and 306 Mini Hydraulic Excavators Machine Systems Recoil Spring - Install
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track - Separate
2005/05/16 Service Replacement Relay is now Available {4493}
312C Excavator Machine System Specifications Recoil Spring
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Backhoe - Lubricate
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Welding on Machines and Engines with Electronic Controls
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Tool Bushing - Inspect/Replace
Adjustment Procedure for the Accelerator Cable of the Governor Motor{1264, 1265} Adjustment Procedure for the Accelerator Cable of the Governor Motor{1264, 1265}
305.5 and 306 Mini Hydraulic Excavators Machine Systems Track Adjuster - Disassemble
2005/06/13 A New Relief Valve with Increased Durability Is Available {5069, 5117}