301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Caterpillar


Fuses - Replace

Usage:

302.5C GBB
Fuses - Fuses protect the electrical system from damage that is caused by overloaded circuits. Replace the fuse if the element separates. If the element of a new fuse separates, check the circuit. If necessary, repair the circuit.


NOTICE

Replace the fuses with the same type and size only. If the type and size is changed, electrical damage can result.

If it is necessary to replace fuses frequently, an electrical problem may exist. Contact your Caterpillar dealer.


The fuse panel is located in the storage box under the operator seat.



Illustration 1g01162478

(1) Spare - 5 Amp

(2) Spare - 10 Amp

(3) Spare - 15 Amp

(4) Spare - 20 Amp

(5) Radio - 5 amp

(6) Window Wiper and Window Washer - 10 amp

(7) Heater - 15 amp

(8) Air conditioning - 20 amp

(9) Start - 10 amp

(10) Engine Start Switch - 15 amp

(11) Cab Dome Light - 10 amp

(12) Horn - 5 amp

(13) Fuel Pump - 5 amp

(14) Accessory - 10 amp

(15) Beacon - 10 amp

(16) Chassis Lights - 15 amp



Illustration 2g01124518
Side view inside storage compartment

(17) Main Fuse - 60 amp

(18) Alternator - 30 amp

Caterpillar Information System:

305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Remove
H35D S, H45D S, H55D S and H65D S Hydraulic Hammers Tool Retaining Pins - Inspect/Replace
345C Excavator Machine System Specifications Boom Cylinder Lines
324D Excavator Safety Messages
323D Excavator Additional Messages
305.5 and 306 Mini Hydraulic Excavators Machine Systems Blower Motor (Heater) - Remove and Install
3500 Engines Engine Overspeed
3500 Engines Crankcase Pressure (High)
305.5 and 306 Mini Hydraulic Excavators Machine Systems Evaporator Coil - Remove and Install
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Swing Gear and Bearing - Lubricate
324D Excavator Fuel System - Prime - If Equipped
324D Excavator Boom/Stick/Bucket Combinations
C32 Petroleum Generator Sets Engine Crankcase Breather - Clean
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Work Tool Control
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines CAN Data Link Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines User Defined Shutdown Input Circuit - Test
2006/10/30 Using Injector Trim Files {1290, 7620}
C11 and C15 Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
2005/06/06 An Improved Exhaust Manifold Is Available {1059}
305.5 and 306 Mini Hydraulic Excavators Machine Systems Cab - Install
C15 and C18 Petroleum Generator Sets After Stopping Engine
325C LCR Excavator Machine Systems Fuel Tank - Remove and Install
C7 Engines for Caterpillar Built Machines Piston and Rings
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.