BH27, BH30 and BH30 W Skid Steer Loader Backhoes Caterpillar


Safety Messages

Usage:

BH27 B2H



图 1g01155373

本作业机具上有一些特定的安全标志。 本章节介绍了危险的确切位置并对危险加以描述。 请熟悉所有的安全标志。

请确保所有的安全标志都很清晰易读。 如果字迹模糊难读就应清洗或更换此安全标志。  当安全标志上的图示无法清晰辨识时,请更换此安全标志。 清洗安全标志时要使用布、水和肥皂。 切勿使用溶剂、汽油或其他强烈的化学药品来清洗安全标志。 溶剂、汽油或其他强烈的化学药品可能使固定标志用的粘着剂失去粘性。 并进而导致安全标志从发动机上脱落。

更换任何已损坏或失落的安全标志。 如果贴有安全标志的零件需要替换,请在替换零件上贴上新的安全标志。 任何卡特彼勒代理商都可以提供新的安全标志。

不准操作(1)

本警告位于软管防护壳体上。



g01150791

------ WARNING! ------

在你阅读和理解操作和保养手册和用户手册前,不要操作本机器或作业机具。 不遵守这些说明或不注意这些警告会造成人身伤亡。 如需更换手册,请与卡特彼勒代理商联系。 小心工作是您的责任。


接头销 (2)

本警告位于软管防护壳体上。



g01150802

------ WARNING! ------

挤伤能导致严重的人身伤害或死亡。 必须确认快换连接器销已接合。 请参阅操作和保养手册


动臂 (3)

这些警告位于动臂的侧面。



g01150793

------ WARNING! ------

在操作过程中,人们没有避让的余地。 可能因挤压而发生严重的伤亡。 避开操作中的作业机具。


稳定支架 (4)

这些警告标志位于稳定支架壳体上。



g01150790

------ WARNING! ------

在操作过程中,人们没有避让的余地。 可能因挤压而发生严重的伤亡。 避开操作中的作业机具。


Caterpillar Information System:

2005/07/18 New Seals on the Shaft of the Main Pump and the Shaft of the Swing Pump Prevents Leaks {5070}
M325D Material Handler Machine Systems Stick Cylinder - Remove and Install
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers Elevated Idle
VHS-10, VHS-30, VHS-40, VHS-50, VHS-60 and VHS-70 Demolition and Scrap Shears Cutting Edge
C7 and C9 Engines for Caterpillar Built Machines Injection Actuation Pressure Control Valve Circuit - Test
325C LCR Excavator Machine Systems Pilot Valve (Control Pattern Change) - Assemble
2005/03/21 An Improved Auger Shaft is Now Used {4054, 6282, 7000}
325C LCR Excavator Machine Systems Pilot Valve (Control Pattern Change) - Disassemble
2005/04/04 An Improved Pin Lock Group for Quick Couplers is Now Available {6129, 6700}
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Sea Water Module Interface
2005/03/01 The Cylinder Liners Have a New Appearance {1216}
VHS-10, VHS-30, VHS-40, VHS-50, VHS-60 and VHS-70 Demolition and Scrap Shears Cutting Edge
302.5C Mini Hydraulic Excavator Machine System Specifications Main Hydraulic Pump
994F Wheel Loader Hydraulic System Electronic Control Module (ECM) - Replace
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Wear Plates - Inspect/Replace
345C Excavator Tool Control System Relay (Hydraulic Activation)
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Remove
S320B, S325B, S340B, S365B and S385B Demolition and Scrap Shears Wear Tip - Inspect/Replace
BR160, BR166, BR172, BR272 and BR378 Brush Cutters Additional Messages
C9 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump - Install
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Specifications
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Plate Locations and Film Locations
BH150 Backhoes and BH160 Backhoes For Skid Steer Loaders and Multi Terrain Loaders Work Tool Installation and Removal
M318C and M322C Wheeled Excavators Power Train Transmission - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.