Air Cleaner - Remove and Install
Removal Procedure
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Loosen clamp (3) .
Show/hide table
 | |
| Illustration 1 | g00849137 |
- Loosen two clamps (2) .
- Slide hose (1) away from air cleaner (4) .
- Loosen clamp (5) .
Show/hide table
 | |
| Illustration 2 | g00849391 |
- Disconnect hose (6) .
- Remove two bolts, nuts, and washers (7) .
- Remove air cleaner (4) .
Installation Procedure
- Install air cleaner (4) .
Show/hide table
| | |
| Illustration 3 | g00849391 |
- Install two bolts, nuts, and washers (7) .
- Connect hose (6) .
- Tighten clamp (5) .
- Slide hose (1) onto air cleaner (4) .
Show/hide table
| | |
| Illustration 4 | g00849137 |
- Tighten clamps (2) .
- Tighten clamp (3) .
Caterpillar Information System:
3512B and 3512C Engines For Caterpillar Built Machines Load Feedback Capability
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Customer Parameters Worksheet
C15 and C18 Petrolem Generator Set Engines Factory Passwords
3176C and 3196 Marine Engines Aftercooler - Install
Replacing the Transformer in the Automatic Transfer Switch{4469} Replacing the Transformer in the Automatic Transfer Switch{4469}
3176C and 3196 Industrial Engines Cylinder Head - Install
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Check Engine Lamp Circuit - Test
3176C and 3196 Marine Engines Aftercooler - Remove
G3406 Engine Charging System
2000/02/01 Correction to Guideline for Reusable Parts and Salvage Operations, SEBF8192-02 {1201}
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Warning Lamp Circuit - Test
3176C and 3196 Marine Engines Transmission Oil Cooler - Remove and Install
3500B and 3500B High Displacement Generator Set Engines Cat Data Link
3176C and 3196 Marine Engines Exhaust Manifold - Remove and Install
3500B Engines Engine Monitoring System
3516B Engine for Caterpillar Built Machines Symptoms
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Can Not Reach Top Engine RPM
3176C and 3196 Marine Engines Heat Exchanger - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Vibration Damper and Pulley - Remove and Install
2000/02/01 Solenoid Available To Service Hydrax Actuators {1259}
3176C and 3196 Marine Engines Heat Exchanger - Install
3508B Industrial Engines Turbocharger
3176C and 3196 Marine Engines Turbocharger Outlet Pressure Sensor - Remove and Install
3176C and 3196 Marine Engines Water Outlet Manifold - Remove