Fan Drive Motor
Show/hide table
 | |
| Illustration 1 | g01445015 |
(1) Torque for the two locknuts ... 22 ± 3 N·m (16 ± 2 lb ft)
(2) Torque for the hose assembly ... 108 ± 10 N·m (80 ± 7 lb ft)
Caterpillar Information System:
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Margin Pressure - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Control Valve (Stick Lowering) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Pressure Switch (Overload Warning) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Control Valve (Boom Lowering) - Test and Adjust
374F Excavator Swing Drive Oil - Change
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Relief Valve (Line) - Test and Adjust - Implement
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Relief Valve (Signal Limiter) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Relief Valve (Pilot) - Test and Adjust - No Medium Pressure Control Valve
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Relief Valve (Pilot) - Test and Adjust - Medium Pressure Control Valve
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Required Tools
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Flow (Medium Pressure Function) - Test and Adjust
M325C Material Handler Machine Systems Cab - Install
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Main Pump (Destroke Pressure) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Swing Pump Control (Throttle Spool Piston) - Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Swing Pump Control (Mechanical Zero) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Swing Pump Control (High Pressure Cutoff) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Swing Brake Pressure - Test
345C Excavator Machine System Specifications Front Lines
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Solenoid Valve (Swing Pump Proportional Relief) - Test and Adjust
345C Excavator Leaving the Machine
365C and 385C Excavators and 365C MHPU and 385C MHPU Mobile Hydraulic Power Units Machine Electronic Control System MID 039 - CID 0096 - FMI 04
C11 and C13 Engines for Caterpillar Built Machines Turbocharger - Remove
C11 and C13 Engines for Caterpillar Built Machines Turbocharger - Install