Required Tools
Show/hide table
Required Tools     | ||
---|---|---|
Part Number     | Part Description     | Qty     |
    | Stopwatch     | 1     |
    | Square     | 1     |
    | Caliper     | 1     |
    | Protractor     | 1     |
    | Wrench (10 mm)     | 1     |
    | Wrench (13 mm)     | 1     |
    | Wrench (17 mm)     | 1     |
    | Wrench (19 mm)     | 1     |
    | Wrench (24 mm)     | 1     |
    | Allen Wrench (4 mm)     | 1     |
    | Allen Wrench (5 mm)     | 1     |
    | Allen Wrench (6 mm)     | 1     |
    | Allen Wrench (8 mm)     | 1     |
1P-3703     | Rectangular Seal     | 1     |
1P-4579     | Half Flange     | 2     |
1U-8292     | Adapter     | 1     |
2J-2668     | Cover     | 1     |
3B-6552     | Elbow     | 4     |
3J-1907     | O-Ring Seal     | 4     |
4C-6481     | Coupler     | 4     |
4C-6482     | Fitting     | 4     |
4C-8767     | Coupling     | 4     |
4C-9910     | Portable Hydraulic Tester     | 1     |
4J-0520     | O-Ring Seal     | 1     |
4J-0524     | O-Ring Seal     | 2     |
5P-0201     | Hose ( 3.5 m (12 ft))     |
2     |
5P-1010     | Sleeve     | 4     |
5P-2937     | O-Ring Adapter     | 2     |
5P-3277     | Automatic Tape Measure     | 1     |
6K-6307     | O-Ring Seal     | 2     |
6V-0400     | Half Flange     | 2     |
6V-0484     | O-Ring Adapter     | 2     |
6V-3014     | Hose As     | 2     |
6V-3965     | Fitting As (TEST)     | 4     |
6V-3966     | Fitting As     | 2     |
6V-3989     | Fitting (TEST)     | 2     |
6V-4143     | Quick Connect Coupler     | 8     |
6V-4433     | Fitting (TEST)     | 1     |
6V-6560     | O-Ring Seal     | 1     |
6V-8397     | O-Ring Seal     | 1     |
6V-8398     | O-Ring Seal     | 2     |
6V-8926     | Adapter     | 2     |
7M-8484     | O-Ring Seal     | 5     |
7M-8485     | O-Ring Seal     | 1     |
7X-0310     | Bolt     | 1     |
7X-0447     | Nut     | 2     |
7X-1452     | Collet Stem     | 2     |
8C-3206     | Half Flange     | 2     |
8C-8762     | Elbow     | 2     |
8C-9026     | Adapter     | 2     |
8T-0273     | Bolt (M12X1.75X40 mm)     | 4     |
8T-0853     | Pressure Gauge (0 to 400 kPa (0 to 58 psi))     | 1     |
8T-0855     | Pressure Gauge (0 to 4,000 kPa (0 to 580 psi))     | 1     |
8T-0857     | Pressure Gauge (0 to 10,000 kPa (0 to 1,450 psi))     | 1     |
8T-0859     | Pressure Gauge (0 to 25,000 kPa (0 to 3,600 psi))     | 1     |
8T-0861     | Pressure Gauge (0 to 60,000 kPa (0 to 8,700 psi))     | 2     |
8T-4121     | Hard Washer     | 2     |
8T-4184     | Bolt (M12X1.75X45 mm)     | 4     |
8T-4196     | Bolt     | 2     |
8T-4223     | Hard Washer     | 4     |
8T-5096     | Dial Indicator Gp     | 1     |
8T-5360     | Washer     | 1     |
8T-7861     | Connector     | 1     |
8T-8902     | Tee     | 1     |
8T-8919     | Bolt     | 1     |
8U-0284     | Half Flange     | 2     |
9U-7335     | Blocking Cover     | 1     |
9U-7400     | Multitach Tool Gp     | 1     |
    | IBM-COMPATIBLE personal computer with an installed current version of Caterpillar Electronic Technician software (1)     | 1     |
9U-7444     | Adapter As     | 2     |
9U-7446     | Adapter     | 1     |
171-4400     | Communication Adapter Gp     | 1     |
FT-2294     | Alignment Bar     | 1     |
FT-2295     | Wrench (75 mm)     | 1     |
FT-2296     | Wrench (41 mm)     | 1     |
Show/hide table
( 1 ) | Refer to Special Publication, JEBD3003, "ET Software CD and Getting Started Guide". Instructions for the use of Electronic Technician software are included in the software. |
Caterpillar Information System:
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Flow (Medium Pressure Function) - Test and Adjust
M325C Material Handler Machine Systems Cab - Install
345C, 365C and 385C Excavators Air Conditioning and Heating Motor (Foot and Defroster Air Control)
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Relief Valve (Medium Pressure Function) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Hydraulic System - Setup - Hammer Valve
345C Excavator Machine System Specifications Pilot Lines
345C Excavator Tool Control System Switch Status - Check
C-10, C-12, C-15 and C-16 Industrial Engines Engine Speed/Timing Sensor - Calibrate
345C Excavator Machine System Specifications Pump Lines (Main)
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Hydraulic System - Setup - Control Valve (Combined Function)
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Cylinder Speed - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Cylinder Drift - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Relief Valve (Pilot) - Test and Adjust - Medium Pressure Control Valve
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Relief Valve (Pilot) - Test and Adjust - No Medium Pressure Control Valve
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Relief Valve (Signal Limiter) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Relief Valve (Line) - Test and Adjust - Implement
374F Excavator Swing Drive Oil - Change
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Control Valve (Boom Lowering) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Pressure Switch (Overload Warning) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Control Valve (Stick Lowering) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Margin Pressure - Test and Adjust
345 MHPUC Mobile Hydraulic Power Unit Machine System Specifications Fan Drive Motor
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Main Pump (Destroke Pressure) - Test and Adjust
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System Swing Motor - Test - Measurement of Case Drain Oil