Lifting Capacities - 312C with a Reach Boom
Show/hide table
Illustration 1 | g00586902 |
(H) Height (F) Lifting capacity over the front of the machine or over the rear of the machine (S) Lifting capacity over the side of the machine (R) Reach |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 1.8 m (6 ft 8 inch) stick, a quick coupler, and 500 mm (1 ft 6 inch) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||
H     | R     | ||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | Maximum Reach     | |||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
6.0 m     |     |     |     |     | 3320 (2)     |     |     | 2460 (2)     | 5.1     | ||
4.5 m     |     |     |     |     | 3470 (2)     | 2970 (2)     | 2140     | 2250 (2)     | 2050     | 6.14     | |
3.0 m     |     |     | 5870 (2)     | 4210 (2)     | 3300     | 2960     | 2090     | 2240 (2)     | 1730     | 6.69     | |
1.5 m     |     |     | 6780 (2)     | 5600     | 4480     | 3080     | 2870     | 2000     | 2310     | 1610     | 6.88     |
0.0 m     |     |     | 6360 (2)     | 5340     | 4300     | 2920     | 2790     | 1930     | 2360     | 1630     | 6.73     |
-1.5 m     | 4850 (2)     | 6830 (2)     | 5330     | 4240     | 2870     | 2770     | 1910     | 2640     | 1820     | 6.22     | |
-3.0 m     | 6420 (2)     | 7470 (2)     | 5450     | 4300     | 2920     |     |     | 3450     | 2380     | 5.23     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 2.25 m (7 ft 5 inch) stick, a quick coupler, and 500 mm (1 ft 8 inch) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||
H     | R     | ||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | Maximum Reach     | |||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
6.0 m     |     |     |     |     |     |     |     |     | 1990 (2)     | 5.6     | |
4.5 m     |     |     |     |     | 3130 (2)     | 3070     | 2190     | 1840 (2)     | 6.56     | ||
3.0 m     |     |     | 5150 (2)     | 3910 (2)     | 3380     | 3010     | 2130     | 1830 (2)     | 1600     | 7.08     | |
1.5 m     |     |     | 7780 (2)     | 5790     | 4550     | 3150     | 2900     | 2040     | 1920 (2)     | 1490     | 7.26     |
0.0 m     |     |     | 6920 (2)     | 5430     | 4350     | 2970     | 2810     | 1950     | 2140 (2)     | 1510     | 7.11     |
-1.5 m     | 4430 (2)     | 6960 (2)     | 5360     | 4260     | 2890     | 2770     | 1910     | 2400     | 1660     | 6.63     | |
-3.0 m     | 6330 (2)     | 7780 (2)     | 5430     | 4280     | 2910     |     |     | 3010     | 2080     | 5.72     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 2.7 m (8 ft 10 inch) stick, a quick coupler, and 500 mm (1 ft 8 inch) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||||
H     | R     | ||||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | 7.5 m     | Maximum Reach     | ||||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
7.5 m     |     |     |     |     |     |     |     |     |     |     | 2060 (2)     | 4.65     | |
6.0 m     |     |     |     |     |     |     | 2140 (2)     |     |     | 1730 (2)     | 6.17     | ||
4.5 m     |     |     |     |     |     |     | 2760 (2)     | 2220     |     |     | 1620 (2)     | 7.05     | |
3.0 m     |     |     |     |     | 3430 (2)     | 3020     | 2140     | 1760 (2)     | 1430     | 1620 (2)     | 1420     | 7.54     | |
1.5 m     |     |     | 6880 (2)     | 5940     | 4490 (2)     | 3170     | 2900     | 2030     | 2020     | 1400     | 1700 (2)     | 1330     | 7.7     |
0.0 m     |     |     | 7710 (2)     | 5440     | 4340     | 2950     | 2790     | 1930     | 1980     | 1360     | 1890 (2)     | 1340     | 7.57     |
-1.5 m     | 4070 (2)     | 7320 (2)     | 5280     | 4220     | 2840     | 2730     | 1860     |     |     | 2120     | 1450     | 7.12     | |
-3.0 m     | 6350 (2)     | 7860 (2)     | 5300     | 4200     | 2820     | 2730     | 1870     |     |     | 2570     | 1760     | 6.28     | |
-4.5 m     |     |     | 6600 (2)     | 5480     | 4250 (2)     | 2930     |     |     |     |     | 3730 (2)     | 2640     | 4.85     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 1.8 m (6 ft 8 inch) stick, a quick coupler, and 600 mm (2 ft) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||
H     | R     | ||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | Maximum Reach     | |||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
6.0 m     |     |     |     |     | 3320 (2)     |     |     | 2460 (2)     | 5.1     | ||
4.5 m     |     |     |     |     | 3470 (2)     | 2970 (2)     | 2170     | 2250 (2)     | 2080     | 6.14     | |
3.0 m     |     |     | 5870 (2)     | 4210 (2)     | 3360     | 3020     | 2130     | 2240 (2)     | 1760     | 6.69     | |
1.5 m     |     |     | 6780 (2)     | 5690     | 4560     | 3130     | 2920     | 2040     | 2360     | 1640     | 6.88     |
0.0 m     |     |     | 6360 (2)     | 5430     | 4380     | 2970     | 2840     | 1960     | 2400     | 1660     | 6.73     |
-1.5 m     | 4850 (2)     | 6830 (2)     | 5420     | 4320     | 2920     | 2820     | 1950     | 2690     | 1860     | 6.22     | |
-3.0 m     | 6420 (2)     | 7470 (2)     | 5540     | 4380     | 2970     |     |     | 3510     | 2420     | 5.23     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 2.25 m (7 ft 5 inch) stick, a quick coupler, and 600 mm (2 ft) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||
H     | R     | ||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | Maximum Reach     | |||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
6.0 m     |     |     |     |     |     |     |     |     | 1990 (2)     | 5.6     | |
4.5 m     |     |     |     |     | 3130 (2)     | 3130 (2)     | 2230     | 1840 (2)     | 6.56     | ||
3.0 m     |     |     | 5150 (2)     | 3910 (2)     | 3430     | 3060     | 2170     | 1830 (2)     | 1630     | 7.08     | |
1.5 m     |     |     | 7780 (2)     | 5880     | 4630     | 3200     | 2960     | 2070     | 1920 (2)     | 1520     | 7.26     |
0.0 m     |     |     | 6920 (2)     | 5520     | 4430     | 3020     | 2870     | 1990     | 2140 (2)     | 1540     | 7.11     |
-1.5 m     | 4430 (2)     | 6960 (2)     | 5450     | 4340     | 2940     | 2820     | 1950     | 2450     | 1690     | 6.63     | |
-3.0 m     | 6330 (2)     | 7780 (2)     | 5520     | 4360     | 2960     |     |     | 3070     | 2120     | 5.72     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 2.7 m (8 ft 10 inch) stick, a quick coupler, and 600 mm (2 ft) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||||
H     | R     | ||||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | 7.5 m     | Maximum Reach     | ||||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
7.5 m     |     |     |     |     |     |     |     |     |     |     | 2060 (2)     | 4.65     | |
6.0 m     |     |     |     |     |     |     | 2140 (2)     |     |     | 1730 (2)     | 6.17     | ||
4.5 m     |     |     |     |     |     |     | 2760 (2)     | 2250     |     |     | 1620 (2)     | 7.05     | |
3.0 m     |     |     |     |     | 3430 (2)     | 3070     | 2180     | 1760 (2)     | 1460     | 1620 (2)     | 1450     | 7.54     | |
1.5 m     |     |     | 6880 (2)     | 6030     | 4490 (2)     | 3220     | 2950     | 2060     | 2060     | 1420     | 1700 (2)     | 1360     | 7.7     |
0.0 m     |     |     | 7710 (2)     | 5530     | 4420     | 3000     | 2840     | 1960     | 2020     | 1380     | 1890 (2)     | 1360     | 7.57     |
-1.5 m     | 4070 (2)     | 7320 (2)     | 5370     | 4290     | 2890     | 2780     | 1900     |     |     | 2160     | 1480     | 7.12     | |
-3.0 m     | 6350 (2)     | 7860 (2)     | 5400     | 4280     | 2870     | 2780     | 1910     |     |     | 2620     | 1790     | 6.28     | |
-4.5 m     |     |     | 6600 (2)     | 5570     | 4250 (2)     | 2980     |     |     |     |     | 3730 (2)     | 2690     | 4.85     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 1.8 m (6 ft 8 inch) stick, a quick coupler, and 700 mm (2 ft 4 inch) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||
H     | R     | ||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | Maximum Reach     | |||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
6.0 m     |     |     |     |     | 3320 (2)     |     |     | 2460 (2)     | 5.1     | ||
4.5 m     |     |     |     |     | 3470 (2)     | 2970 (2)     | 2210     | 2250 (2)     | 2120     | 6.14     | |
3.0 m     |     |     | 5870 (2)     | 4210 (2)     | 3410     | 3070     | 2160     | 2240 (2)     | 1790     | 6.69     | |
1.5 m     |     |     | 6780 (2)     | 5780     | 4640     | 3180     | 2980     | 2070     | 2360 (2)     | 1670     | 6.88     |
0.0 m     |     |     | 6360 (2)     | 5530     | 4460     | 3020     | 2900     | 2000     | 2450     | 1690     | 6.73     |
-1.5 m     | 4850 (2)     | 6830 (2)     | 5520     | 4400     | 2970     | 2880     | 1980     | 2740     | 1890     | 6.22     | |
-3.0 m     | 6420 (2)     | 7470 (2)     | 5630     | 4460     | 3020     |     |     | 3580     | 2460     | 5.23     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 2.25 m (7 ft 5 inch) stick, a quick coupler, and 700 mm (2 ft 4 inch) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||
H     | R     | ||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | Maximum Reach     | |||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
6.0 m     |     |     |     |     |     |     |     |     | 1990 (2)     | 5.6     | |
4.5 m     |     |     |     |     | 3130 (2)     | 3130 (2)     | 2270     | 1840 (2)     | 6.56     | ||
3.0 m     |     |     | 5150 (2)     | 3910 (2)     | 3480     | 3120     | 2200     | 1830 (2)     | 1660     | 7.08     | |
1.5 m     |     |     | 7780 (2)     | 5980     | 4710     | 3250     | 3010     | 2110     | 1920 (2)     | 1550     | 7.26     |
0.0 m     |     |     | 6920 (2)     | 5620     | 4510     | 3070     | 2920     | 2020     | 2140 (2)     | 1570     | 7.11     |
-1.5 m     | 4430 (2)     | 6960 (2)     | 5550     | 4420     | 2990     | 2880     | 1980     | 2500     | 1730     | 6.63     | |
-3.0 m     | 6330 (2)     | 7780 (2)     | 5620     | 4440     | 3010     |     |     | 3130     | 2160     | 5.72     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 2.7 m (8 ft 10 inch) stick, a quick coupler, and 700 mm (2 ft 4 inch) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||||
H     | R     | ||||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | 7.5 m     | Maximum Reach     | ||||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
7.5 m     |     |     |     |     |     |     |     |     |     |     | 2060 (2)     | 4.65     | |
6.0 m     |     |     |     |     |     |     | 2140 (2)     |     |     | 1730 (2)     | 6.17     | ||
4.5 m     |     |     |     |     |     |     | 2760 (2)     | 2290     |     |     | 1620 (2)     | 7.05     | |
3.0 m     |     |     |     |     | 3430 (2)     | 3090 (2)     | 2210     | 1760 (2)     | 1490     | 1620 (2)     | 1480     | 7.54     | |
1.5 m     |     |     | 6880 (2)     | 6120     | 4490 (2)     | 3270     | 3010     | 2100     | 2100     | 1450     | 1700 (2)     | 1380     | 7.7     |
0.0 m     |     |     | 7710 (2)     | 5620     | 4500     | 3060     | 2900     | 2000     | 2060     | 1410     | 1890 (2)     | 1390     | 7.57     |
-1.5 m     | 4070 (2)     | 7320 (2)     | 5460     | 4380     | 2940     | 2830     | 1940     |     |     | 2210     | 1510     | 7.12     | |
-3.0 m     | 6350 (2)     | 7860 (2)     | 5490     | 4360     | 2930     | 2840     | 1940     |     |     | 2670     | 1830     | 6.28     | |
-4.5 m     |     |     | 6600 (2)     | 5670     | 4250 (2)     | 3040     |     |     |     |     | 3730 (2)     | 2740     | 4.85     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 1.8 m (6 ft 8 inch) stick, a quick coupler, and 770 mm (2 ft 6 inch) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||
H     | R     | ||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | Maximum Reach     | |||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
6.0 m     |     |     |     |     | 3320 (2)     |     |     | 2460 (2)     | 5.1     | ||
4.5 m     |     |     |     |     | 3470 (2)     | 2970 (2)     | 2220     | 2250 (2)     | 2130     | 6.14     | |
3.0 m     |     |     | 5870 (2)     | 4210 (2)     | 3430     | 3090     | 2170     | 2240 (2)     | 1800     | 6.69     | |
1.5 m     |     |     | 6780 (2)     | 5810     | 4660     | 3200     | 2990     | 2090     | 2360 (2)     | 1680     | 6.88     |
0.0 m     |     |     | 6360 (2)     | 5560     | 4490     | 3040     | 2920     | 2010     | 2460     | 1700     | 6.73     |
-1.5 m     | 4850 (2)     | 6830 (2)     | 5550     | 4430     | 2990     | 2900     | 1990     | 2760     | 1900     | 6.22     | |
-3.0 m     | 6420 (2)     | 7470 (2)     | 5660     | 4490     | 3040     |     |     | 3600     | 2480     | 5.23     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 2.25 m (7 ft 5 inch) stick, a quick coupler, and 770 mm (2 ft 6 inch) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||
H     | R     | ||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | Maximum Reach     | |||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
6.0 m     |     |     |     |     |     |     |     |     | 1990 (2)     | 5.6     | |
4.5 m     |     |     |     |     | 3130 (2)     | 3130 (2)     | 2280     | 1840 (2)     | 6.56     | ||
3.0 m     |     |     | 5150 (2)     | 3910 (2)     | 3500     | 3130     | 2220     | 1830 (2)     | 1670     | 7.08     | |
1.5 m     |     |     | 7780 (2)     | 6010     | 4740     | 3270     | 3030     | 2120     | 1920 (2)     | 1560     | 7.26     |
0.0 m     |     |     | 6920 (2)     | 5650     | 4540     | 3090     | 2940     | 2040     | 2140 (2)     | 1580     | 7.11     |
-1.5 m     | 4430 (2)     | 6960 (2)     | 5580     | 4450     | 3010     | 2900     | 2000     | 2510     | 1740     | 6.63     | |
-3.0 m     | 6330 (2)     | 7780 (2)     | 5650     | 4470     | 3030     |     |     | 3150     | 2170     | 5.72     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Show/hide table
312C Excavator with a 4.65 m (15 ft 3 inch) reach boom, a 2.7 m (8 ft 10 inch) stick, a quick coupler, and 770 mm (2 ft 6 inch) triple grouser track shoes (1) All lifting capacities are in kilograms.     |
|||||||||||||
H     | R     | ||||||||||||
1.5 m | 3.0 m     | 4.5 m     | 6.0 m     | 7.5 m     | Maximum Reach     | ||||||||
F | S     | F     | S     | F     | S     | F     | S     | F     | S     | F     | S     | m     | |
7.5 m     |     |     |     |     |     |     |     |     |     |     | 2060 (2)     | 4.65     | |
6.0 m     |     |     |     |     |     |     | 2140 (2)     |     |     | 1730 (2)     | 6.17     | ||
4.5 m     |     |     |     |     |     |     | 2760 (2)     | 2300     |     |     | 1620 (2)     | 7.05     | |
3.0 m     |     |     |     |     | 3430 (2)     | 3090 (2)     | 2230     | 1760 (2)     | 1500     | 1620 (2)     | 1490     | 7.54     | |
1.5 m     |     |     | 6880 (2)     | 6150     | 4490 (2)     | 3290     | 3030     | 2110     | 2120     | 1460     | 1700 (2)     | 1390     | 7.7     |
0.0 m     |     |     | 7710 (2)     | 5650     | 4530     | 3080     | 2920     | 2010     | 2070     | 1420     | 1890 (2)     | 1400     | 7.57     |
-1.5 m     | 4070 (2)     | 7320 (2)     | 5500     | 4400     | 2960     | 2850     | 1950     |     |     | 2220     | 1520     | 7.12     | |
-3.0 m     | 6350 (2)     | 7860 (2)     | 5520     | 4390     | 2950     | 2860     | 1960     |     |     | 2680     | 1840     | 6.28     | |
-4.5 m     |     |     | 6600 (2)     | 5700     | 4250 (2)     | 3050     |     |     |     |     | 3730 (2)     | 2750     | 4.85     |
Show/hide table
( 1 ) | Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities. |
( 2 ) | Capacity is limited by hydraulics rather than by a tipping load. |
Caterpillar Information System:
2004/06/07 An Improved Service Brake Control Valve Is Available {1435, 4265, 5051}
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
318C and 319C Excavators Engine Oil Sample - Obtain
325D and 329D Excavators Air Conditioning and Heating Control
C11 and C13 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
M325C Material Handler Hydraulic System Oil Sample - Obtain
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Service Hour Meter
324D and 326D Excavators Work Tool Control Pedal - If Equipped
2004/06/21 New Procedure Will Improve Recirculation Filter's Serviceability {7342}
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397} Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
M313C and M315C Excavators Lifting Capacities - M315C Excavator with a Offset Boom (Wide Axle and Wide Dozer)
2006/02/13 Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
312C Excavator Lifting Capacities - 312C L with a VA Boom and a 2.49 m Blade
2004/07/05 New Test ECM Available for Hydraulics {7610}
2011/11/23 New Test ECM Is Now Available for Certain Cat Machines {0785, 1901, 1920, 7610}
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Lifting Capacities - M316C Excavator with a VA Boom
345C MHPU Mobile Hydraulic Power Unit Cooling System Coolant Sample (Level 1) - Obtain
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Air Cleaner - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Cooling System Coolant (ELC) - Change
312C Excavator Lifting Capacities - 312C L with a Reach Boom and a 2.49 m Blade
312C Excavator Lifting Capacities - 312C L with a Reach Boom and a 2.78 m Blade
312C Excavator Lifting Capacities - 312C L with a VA Boom and No Blade
312C Excavator Lifting Capacities - 312C L with a VA Boom and a 2.78 m Blade
2005/03/07 The Operator Monitor Gp Is Improved {7490}