M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Caterpillar

Lifting Capacities - M316C Excavator with a VA Boom

Usage:

Note: These lifting capacity tables are for typical options.

Note: For more information on your specific configuration, see your dealer.

Note: The lifting capacities in the following tables represent the maximum lifting capacities. Each machine is configured differently. The following options require additional tables for lifting capacities:

Optional buckets
Optional sticks
Quick coupler

The following conditions affect the lifting capacities:

(A) - The rear dozer is up.

(B) - The rear dozer is down. The lifting capacity is over the rear.

(C) - The rear stabilizers are down. The lifting capacity is over the rear.

(D) - The front and rear stabilizers are down.

(E) - The rear dozer and front stabilizers are down.

(F) - Front Load

(S) - Side Load

Show/hide table

Table 1
M316C Excavator with a VA Boom, 2.1 m (6.9 ft) stick and a quick coupler Lifting Capacities in Metric Tons
Radius		3.0 m		4.5 m		6.0 m		7.5 m		Maximum Reach
Load Point Height		F	S	F	S	F	S	F	S	F	S	m
6.0 m	A			5.1 ⁽¹⁾	4.5	4.5	2.7
	B				5.1	4.8 ⁽¹⁾	3.1
	C				5.1 ⁽¹⁾		3.8
	D						4.8 ⁽¹⁾
	E						4.6
4.5 m	A	6.3 ⁽¹⁾		6.1 ⁽¹⁾	4.4	4.5	2.8
	B				5.0	5.1 ⁽¹⁾	3.2
	C				5.9		3.9
	D				6.1 ⁽¹⁾		5.1 ⁽¹⁾
	E				6.1 ⁽¹⁾		4.6
3.0 m	A	8.2 ⁽¹⁾	7.6	6.7	4.2	4.4 ⁽¹⁾	2.8	3.0	1.8	2.4 ⁽¹⁾	1.6	8.11
	B		8.2 ⁽¹⁾	7.2 ⁽¹⁾	4.8	5.4 ⁽¹⁾	3.2	4.2 ⁽¹⁾	2.1		1.8
	C				5.8 ⁽¹⁾		3.9		2.5		2.3
	D				7.2 ⁽¹⁾		5.4		3.8		2.4 ⁽¹⁾
	E				7.0 ⁽¹⁾		4.6 ⁽¹⁾		3.1		2.4 ⁽¹⁾
1.5 m	A	9.6 ⁽¹⁾	7.5	6.7 ⁽¹⁾	4.2	4.4	2.7	3.0	1.7	2.5 ⁽¹⁾	1.5	8.21
	B		8.7	7.9 ⁽¹⁾	4.8	5.7 ⁽¹⁾	3.1	4.5 ⁽¹⁾	2.0		1.8
	C		9.6 ⁽¹⁾		5.7		3.8	4.2	2.5		2.2
	D				7.9 ⁽¹⁾		5.4 ⁽¹⁾	4.5 ⁽¹⁾	3.7		2.5 ⁽¹⁾
	E				6.9		4.6	4.5 ⁽¹⁾	3.1		2.5 ⁽¹⁾
0.0 m	A	11.8 ⁽¹⁾	7.3	6.7	4.0	4.3	2.6	2.9	1.7	2.6 ⁽¹⁾	1.5	7.99
	B		8.6	8.0 ⁽¹⁾	4.7	5.8 ⁽¹⁾	3.0	3.9 ⁽¹⁾	2.0		1.8
	C		10.8 ⁽¹⁾		5.7		3.6		2.4		2.3
	D		11.8 ⁽¹⁾		8.0 ⁽¹⁾		5.4		3.7		2.6 ⁽¹⁾
	E		11.8 ⁽¹⁾		6.9		4.5		3.0		2.6 ⁽¹⁾
-1.5 m	A	13.1 ⁽¹⁾	7.0	6.7	3.9	4.1	2.4			3.0	1.7	7.42
	B		8.4	8.2 ⁽¹⁾	4.5	5.7 ⁽¹⁾	2.8			3.0 ⁽¹⁾	2.0
	C		10.7		5.6		3.5				2.5
	D		13.1 ⁽¹⁾		8.2 ⁽¹⁾		5.2				3.0 ⁽¹⁾
	E		13.1 ⁽¹⁾		7.0		4.3				3.0 ⁽¹⁾
-3.0 m	A	13.3 ⁽¹⁾	7.1	6.5	3.7
	B		8.4	7.5 ⁽¹⁾	4.3
	C		10.8		5.4
	D		13.3 ⁽¹⁾		7.5 ⁽¹⁾
	E		13.3 ⁽¹⁾		6.7

Show/hide table

^( 1 )

Capacity is limited by hydraulics rather than by a tipping load. The loads do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.

Show/hide table

Table 2
M316C Excavator with a VA Boom, 2.1 m (6.9 ft) stick and a quick coupler 400 kg Additional Counterweight Lifting Capacities in Metric Tons
Radius		3.0 m		4.5 m		6.0 m		7.5 m		Maximum Reach
Load Point Height		F	S	F	S	F	S	F	S	F	S	m
6.0 m	A			5.1 ⁽¹⁾	4.7	4.7	2.9
	B				5.1 ⁽¹⁾	4.8 ⁽¹⁾	3.3
	C						4.0
	D						4.8 ⁽¹⁾
	E						4.8 ⁽¹⁾
4.5 m	A	6.3 ⁽¹⁾		6.1 ⁽¹⁾	4.6	4.7	3.0
	B				5.2	5.1 ⁽¹⁾	3.4
	C				6.1 ⁽¹⁾		4.1
	D						5.1 ⁽¹⁾
	E						4.8
3.0 m	A	8.2 ⁽¹⁾	8.0	7.0	4.5	4.6	3.0	3.2	1.9	2.4 ⁽¹⁾	1.7	8.11
	B		8.2 ⁽¹⁾	7.2 ⁽¹⁾	5.1 ⁽¹⁾	5.4 ⁽¹⁾	3.4	4.2 ⁽¹⁾	2.2		2.0
	C				6.1		4.0		2.7		2.4 ⁽¹⁾
	D				7.2 ⁽¹⁾		5.4 ⁽¹⁾		4.0
	E				7.2 ⁽¹⁾		4.8		3.3
1.5 m	A	9.6 ⁽¹⁾	7.8 ⁽¹⁾	6.9 ⁽¹⁾	4.5	4.6	2.9	3.1	1.9	2.5 ⁽¹⁾	1.6	8.21
	B		9.0	7.9 ⁽¹⁾	5.0 ⁽¹⁾	5.7 ⁽¹⁾	3.3	4.5 ⁽¹⁾	2.2		1.9
	C		9.6 ⁽¹⁾		6.0		4.0	4.4	2.7		2.3
	D				7.9 ⁽¹⁾		5.5 ⁽¹⁾	4.5 ⁽¹⁾	3.9		2.5 ⁽¹⁾
	E				7.2		4.8 ⁽¹⁾	4.5 ⁽¹⁾	3.3		2.5 ⁽¹⁾
0.0 m	A	11.8 ⁽¹⁾	7.7	7.0	4.3	4.5	2.7	3.1	1.8	2.6 ⁽¹⁾	1.7	7.99
	B		9.1	8.0 ⁽¹⁾	4.9	5.8 ⁽¹⁾	3.1	3.9 ⁽¹⁾	2.1		1.9
	C		11.2		6.0		3.8		2.6		2.4
	D		11.8 ⁽¹⁾		8.0 ⁽¹⁾		5.6		3.9		2.6 ⁽¹⁾
	E		11.8 ⁽¹⁾		7.2		4.7		3.2		2.6 ⁽¹⁾
-1.5 m	A	13.1 ⁽¹⁾	7.5	7.1	4.2	4.4	2.6			3.0 ⁽¹⁾	1.9	7.42
	B		8.8	8.2 ⁽¹⁾	4.8	5.7 ⁽¹⁾	3.0				2.2
	C		11.3		5.9		3.7				2.7
	D		13.1 ⁽¹⁾		8.2 ⁽¹⁾		5.5				3.0 ⁽¹⁾
	E		13.1 ⁽¹⁾		7.3		4.5				3.0 ⁽¹⁾
-3.0 m	A	13.3 ⁽¹⁾	7.5	6.8	3.9
	B		8.9	7.5 ⁽¹⁾	4.6
	C		11.3		5.7
	D		13.3 ⁽¹⁾		7.5 ⁽¹⁾
	E		13.3 ⁽¹⁾		7.0

Show/hide table

^( 1 )

Show/hide table

Table 3
M316C Excavator with a VA Boom, 2.4 m (7.9 ft) stick and a quick coupler Lifting Capacities in Metric Tons
Radius		3.0 m		4.5 m		6.0 m		7.5 m		Maximum Reach
Load Point Height		F	S	F	S	F	S	F	S	F	S	m
6.0 m	A			4.4 ⁽¹⁾		4.3 ⁽¹⁾	2.8
	B						3.2
	C						3.9
	D						4.3 ⁽¹⁾
	E						4.3 ⁽¹⁾
4.5 m	A	4.7 ⁽¹⁾		5.2 ⁽¹⁾	4.4	4.5	2.8	2.8 ⁽¹⁾	1.8
	B				5.0	4.9 ⁽¹⁾	3.3		2.1
	C				5.2 ⁽¹⁾		3.9		2.6
	D						4.9 ⁽¹⁾		2.8 ⁽¹⁾
	E						4.6		2.8 ⁽¹⁾
3.0 m	A	8.8 ⁽¹⁾	7.6	6.7	4.2	4.4	2.8	3.0	1.8	2.1 ⁽¹⁾	1.5	8.38
	B		8.8 ⁽¹⁾	7.0 ⁽¹⁾	4.8	5.3 ⁽¹⁾	3.2	4.4 ⁽¹⁾	2.1		1.7
	C				5.8		3.8	4.2	2.6		2.1 ⁽¹⁾
	D				7.0 ⁽¹⁾		5.3 ⁽¹⁾	4.4 ⁽¹⁾	3.8
	E				7.0 ⁽¹⁾		4.6	4.4 ⁽¹⁾	3.2
1.5 m	A	9.8 ⁽¹⁾	7.5	6.6 ⁽¹⁾	4.2	4.4	2.8	3.0	1.7	2.2 ⁽¹⁾	1.4	8.47
	B		8.6 ⁽¹⁾	7.8 ⁽¹⁾	4.8	5.7 ⁽¹⁾	3.2	4.5 ⁽¹⁾	2.0		1.7
	C		9.8 ⁽¹⁾		5.7 ⁽¹⁾		3.8	4.2	2.5		2.1
	D				7.8 ⁽¹⁾		5.3	4.5 ⁽¹⁾	3.8		2.2 ⁽¹⁾
	E				6.9		4.5	4.5 ⁽¹⁾	3.1		2.2 ⁽¹⁾
0.0 m	A	11.5 ⁽¹⁾	7.3	6.7	4.1	4.3	2.6	2.9	1.7	2.3 ⁽¹⁾	1.4	8.26
	B		8.7	8.0 ⁽¹⁾	4.7	5.8 ⁽¹⁾	3.0	4.3 ⁽¹⁾	2.0		1.7
	C		10.7 ⁽¹⁾		5.8		3.7	4.1	2.4		2.1
	D		11.5 ⁽¹⁾		8.0 ⁽¹⁾		5.4 ⁽¹⁾	4.3 ⁽¹⁾	3.7		2.3 ⁽¹⁾
	E		11.5 ⁽¹⁾		6.9		4.5	4.3 ⁽¹⁾	3.0		2.3 ⁽¹⁾
-1.5 m	A	13.0	7.0	6.7	3.9	4.2	2.4			2.7 ⁽¹⁾	1.6	7.72
	B	13.0 ⁽¹⁾	8.4	8.1 ⁽¹⁾	4.5	5.9 ⁽¹⁾	2.8				1.9
	C		10.7		5.6		3.5				2.3
	D		13.0 ⁽¹⁾		8.1 ⁽¹⁾		5.2				2.7 ⁽¹⁾
	E		13.0 ⁽¹⁾		7.0		4.3				2.7 ⁽¹⁾
-3.0 m	A	13.4 ⁽¹⁾	7.0	6.5	3.7	4.1	2.3
	B		8.3	8.0 ⁽¹⁾	4.3	4.2 ⁽¹⁾	2.7
	C		10.7		5.4		3.4
	D		13.4 ⁽¹⁾		8.0 ⁽¹⁾		4.2 ⁽¹⁾
	E		13.4 ⁽¹⁾		6.7		4.2 ⁽¹⁾

Show/hide table

^( 1 )

Show/hide table

Table 4
M316C Excavator with a VA Boom, 2.4 m (7.9 ft) stick and a quick coupler 400 kg Additional Counterweight Lifting Capacities in Metric Tons
Radius		3.0 m		4.5 m		6.0 m		7.5 m		Maximum Reach
Load Point Height		F	S	F	S	F	S	F	S	F	S	m
6.0 m	A			4.4 ⁽¹⁾		4.3 ⁽¹⁾	3.0
	B						3.4
	C						4.1
	D						4.3 ⁽¹⁾
	E						4.3 ⁽¹⁾
4.5 m	A	4.7 ⁽¹⁾		5.2 ⁽¹⁾	4.6	4.7	3.0	2.8 ⁽¹⁾	1.9
	B				5.2 ⁽¹⁾	4.9 ⁽¹⁾	3.4		2.2
	C						4.1		2.7
	D						4.9 ⁽¹⁾		2.8 ⁽¹⁾
	E						4.8		2.8 ⁽¹⁾
3.0 m	A	8.8 ⁽¹⁾	8.1 ⁽¹⁾	7.0 ⁽¹⁾	4.5	4.6	3.0	3.2	1.9	2.1 ⁽¹⁾	1.6	8.38
	B		8.8 ⁽¹⁾		5.1 ⁽¹⁾	5.3 ⁽¹⁾	3.4	4.4 ⁽¹⁾	2.2		1.9
	C				6.1		4.0		2.7		2.1 ⁽¹⁾
	D				7.0 ⁽¹⁾		5.3 ⁽¹⁾		4.0
	E				7.0 ⁽¹⁾		4.8		3.3
1.5 m	A	9.8 ⁽¹⁾	7.8 ⁽¹⁾	6.9	4.4	4.6	2.9	3.2	1.9	2.2 ⁽¹⁾	1.5	8.47
	B		9.0	7.8 ⁽¹⁾	5.0	5.7 ⁽¹⁾	3.3	4.5 ⁽¹⁾	2.2		1.8
	C		9.8 ⁽¹⁾		6.0		4.0	4.4	2.7		2.2 ⁽¹⁾
	D				7.8 ⁽¹⁾		5.5 ⁽¹⁾	4.5 ⁽¹⁾	3.9
	E				7.1 ⁽¹⁾		4.7	4.5 ⁽¹⁾	3.3
0.0 m	A	11.5 ⁽¹⁾	7.7	7.0	4.3	4.6	2.8	3.1	1.8	2.3 ⁽¹⁾	1.6	8.26
	B		9.1	8.0 ⁽¹⁾	5.0	5.8 ⁽¹⁾	3.2	4.3 ⁽¹⁾	2.1		1.8
	C		11.1		6.0		3.9		2.6		2.3
	D		11.5 ⁽¹⁾		8.0 ⁽¹⁾		5.5		3.9		2.3 ⁽¹⁾
	E		11.5 ⁽¹⁾		7.1		4.7 ⁽¹⁾		3.2		2.3 ⁽¹⁾
-1.5 m	A	13.0 ⁽¹⁾	7.5	7.0	4.1	4.4	2.6			2.7 ⁽¹⁾	1.7	7.72
	B		8.8	8.1 ⁽¹⁾	4.8	5.9 ⁽¹⁾	3.0				2.0
	C		11.3		5.9		3.7				2.5
	D		13.0 ⁽¹⁾		8.1 ⁽¹⁾		5.5				2.7 ⁽¹⁾
	E		13.0 ⁽¹⁾		7.3		4.5				2.7 ⁽¹⁾
-3.0 m	A	13.4 ⁽¹⁾	7.4	6.8	4.0	4.2 ⁽¹⁾	2.5
	B		8.8	8.0 ⁽¹⁾	4.6		2.9
	C		11.2		5.7		3.6
	D		13.4 ⁽¹⁾		8.0 ⁽¹⁾		4.2 ⁽¹⁾
	E		13.4 ⁽¹⁾		7.1		4.2 ⁽¹⁾

Show/hide table

^( 1 )

Show/hide table

Table 5
M316C Excavator with a VA Boom, 2.6 m (8.5 ft) stick and a quick coupler Lifting Capacities in Metric Tons
Radius		3.0 m		4.5 m		6.0 m		7.5 m		Maximum Reach
Load Point Height		F	S	F	S	F	S	F	S	F	S	m
6.0 m	A			4.0 ⁽¹⁾		4.1 ⁽¹⁾	2.8
	B						3.2
	C						3.9
	D						4.1 ⁽¹⁾
	E						4.1 ⁽¹⁾
4.5 m	A			4.6 ⁽¹⁾	4.4	4.5	2.9	3.1	1.8
	B				4.6 ⁽¹⁾	4.6 ⁽¹⁾	3.3 ⁽¹⁾	3.3 ⁽¹⁾	2.1
	C						3.9		2.6
	D						4.6 ⁽¹⁾		3.3 ⁽¹⁾
	E						4.6		3.2
3.0 m	A	8.2 ⁽¹⁾	7.6	6.8	4.2	4.4	2.8	3.1	1.8	1.9 ⁽¹⁾	1.4	8.58
	B		8.2 ⁽¹⁾	6.8 ⁽¹⁾	4.8	5.2 ⁽¹⁾	3.2	4.3 ⁽¹⁾	2.1		1.7
	C				5.8		3.8	4.3	2.6		1.9 ⁽¹⁾
	D				6.8 ⁽¹⁾		5.2 ⁽¹⁾	4.3 ⁽¹⁾	3.8
	E				6.8 ⁽¹⁾		4.6	4.3 ⁽¹⁾	3.2
1.5 m	A	9.6 ⁽¹⁾	7.4	6.7	4.2	4.4	2.8	3.0	1.8	2.0 ⁽¹⁾	1.4	8.67
	B		8.7	7.7 ⁽¹⁾	4.8	5.6 ⁽¹⁾	3.2	4.4 ⁽¹⁾	2.1		1.6
	C		9.6 ⁽¹⁾		5.7		3.8	4.2	2.5		2.0 ⁽¹⁾
	D				7.7 ⁽¹⁾		5.3	4.4 ⁽¹⁾	3.8
	E				6.8		4.5	4.4 ⁽¹⁾	3.1
0.0 m	A	11.4 ⁽¹⁾	7.4	6.7	4.1	4.3	2.7	2.9	1.7	2.2 ⁽¹⁾	1.4	8.46
	B		8.7	8.0 ⁽¹⁾	4.7	5.7 ⁽¹⁾	3.0	4.4 ⁽¹⁾	2.0		1.6
	C		10.7		5.7		3.7	4.1	2.5		2.0
	D		11.4 ⁽¹⁾		8.0 ⁽¹⁾		5.3	4.4 ⁽¹⁾	3.7		2.2 ⁽¹⁾
	E		11.4 ⁽¹⁾		6.8		4.5	4.4 ⁽¹⁾	3.1		2.2 ⁽¹⁾
-1.5 m	A	12.9 ⁽¹⁾	7.0	6.7	3.9	4.2	2.5	2.9	1.6	2.4 ⁽¹⁾	1.5	7.94
	B		8.4	8.1 ⁽¹⁾	4.5	5.9 ⁽¹⁾	2.9	3.1 ⁽¹⁾	1.9		1.8
	C		10.7		5.6		3.5		2.4		2.2
	D		12.9 ⁽¹⁾		8.1 ⁽¹⁾		5.3		3.1 ⁽¹⁾		2.4 ⁽¹⁾
	E		12.9 ⁽¹⁾		7.0		4.4		3.0		2.4 ⁽¹⁾
-3.0 m	A	13.3 ⁽¹⁾	7.0	6.5	3.7	4.1	2.4			2.8 ⁽¹⁾	1.9	7.00
	B		8.3	8.2 ⁽¹⁾	4.3	4.8 ⁽¹⁾	2.7				2.2
	C		10.7		5.4		3.4				2.7
	D		13.3 ⁽¹⁾		8.2 ⁽¹⁾		4.8 ⁽¹⁾				2.8 ⁽¹⁾
	E		13.3 ⁽¹⁾		6.8		4.2				2.8 ⁽¹⁾
-4.5 m	A	9.2 ⁽¹⁾	6.9
	B		8.2
	C		9.2 ⁽¹⁾
	D
	E

Show/hide table

^( 1 )

Show/hide table

Table 6
M316C Excavator with a VA Boom, 2.6 m (8.5 ft) stick and a quick coupler 400 kg Additional Counterweight Lifting Capacities in Metric Tons
Radius		3.0 m		4.5 m		6.0 m		7.5 m		Maximum Reach
Load Point Height		F	S	F	S	F	S	F	S	F	S	m
6.0 m	A			4.0 ⁽¹⁾		4.1 ⁽¹⁾	3.0
	B						3.4
	C						4.1
	D						4.1 ⁽¹⁾
	E						4.1 ⁽¹⁾
4.5 m	A			4.6 ⁽¹⁾		4.6 ⁽¹⁾	3.0	3.2	2.0
	B						3.4 ⁽¹⁾	3.3 ⁽¹⁾	2.3
	C						4.1		2.8
	D						4.6 ⁽¹⁾		3.3 ⁽¹⁾
	E						4.6 ⁽¹⁾		3.3 ⁽¹⁾
3.0 m	A	8.2 ⁽¹⁾	8.1	6.8 ⁽¹⁾	4.5	4.6	3.0	3.2	2.0	1.9 ⁽¹⁾	1.5	8.58
	B		8.2 ⁽¹⁾		5.1	5.2 ⁽¹⁾	3.4	4.3 ⁽¹⁾	2.3		1.8
	C				6.1		4.0 ⁽¹⁾		2.8		1.9 ⁽¹⁾
	D				6.8 ⁽¹⁾		5.2 ⁽¹⁾		4.0
	E				6.8 ⁽¹⁾		4.8		3.4
1.5 m	A	9.6 ⁽¹⁾	7.9	6.9	4.4	4.6	3.0	3.2	1.9	2.0 ⁽¹⁾	1.5	8.67
	B		9.0	7.7 ⁽¹⁾	5.0	5.6 ⁽¹⁾	3.4	4.4 ⁽¹⁾	2.2		1.7
	C		9.6 ⁽¹⁾		5.9		4.0		2.7		2.0 ⁽¹⁾
	D				7.7 ⁽¹⁾		5.5		4.0
	E				7.1		4.7		3.3
0.0 m	A	11.4 ⁽¹⁾	7.8	6.9	4.3	4.6	2.8	3.1 ⁽¹⁾	1.8	2.2 ⁽¹⁾	1.5	8.46
	B		9.0	8.0 ⁽¹⁾	5.0	5.7 ⁽¹⁾	3.2	4.4 ⁽¹⁾	2.1		1.8
	C		11.1		5.9		3.9	4.3	2.6		2.2 ⁽¹⁾
	D		11.4 ⁽¹⁾		8.0 ⁽¹⁾		5.5	4.4 ⁽¹⁾	3.9
	E		11.4 ⁽¹⁾		7.1		4.7	4.4 ⁽¹⁾	3.2
-1.5 m	A	12.9 ⁽¹⁾	7.5	7.1	4.1	4.4	2.6	3.0	1.8	2.4 ⁽¹⁾	1.7	7.94
	B		8.9	8.1 ⁽¹⁾	4.8	5.9 ⁽¹⁾	3.1	3.1 ⁽¹⁾	2.1		1.9
	C		11.3		5.9		3.7		2.6		2.4
	D		12.9 ⁽¹⁾		8.1 ⁽¹⁾		5.5		3.1 ⁽¹⁾		2.4 ⁽¹⁾
	E		12.9 ⁽¹⁾		7.3		4.6		3.1 ⁽¹⁾		2.4 ⁽¹⁾
-3.0 m	A	13.3 ⁽¹⁾	7.4	6.9	4.0	4.3	2.5			2.8 ⁽¹⁾	2.0	7.00
	B		8.8	8.2 ⁽¹⁾	4.6	4.8 ⁽¹⁾	2.9				2.4
	C		11.2		5.7		3.6				2.8 ⁽¹⁾
	D		13.3 ⁽¹⁾		8.2 ⁽¹⁾		4.8 ⁽¹⁾
	E		13.3 ⁽¹⁾		7.1		4.5
-4.5 m	A	9.2 ⁽¹⁾	7.3
	B		8.7
	C		9.2 ⁽¹⁾
	D
	E