Air Cleaner - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7573     | Link Bracket     | 2     |
B     | 138-7575     | Link Bracket     | 2     |
- Remove cover (1), cover (2), and bolts (3) .
Show/hide table
Illustration 1 | g01079440 |
- Disconnect tube assembly (5) and clip (6) under cover (4) .
Show/hide table
Illustration 2 | g01079464 |
- Install Tooling (A) and a suitable lifting device to cover (4). The weight of cover (4) is approximately 29 kg (65 lb). Remove prop rod (7) from the side door. Remove cover (4) .
Show/hide table
Illustration 3 | g01079465 |
Show/hide table
Illustration 4 | g01079504 |
- Disconnect hose (11), dust ejector (8) and strip (13). Remove guard (14) .
Show/hide table
Illustration 5 | g01079466 |
- Remove left guard (9). Disconnect both ends of dryer (10). Remove U-bolts (12) .
- Remove bolts (15) and clip (16) from behind mat (17) (not shown).
Show/hide table
Illustration 6 | g01079467 |
- Disconnect harness assembly (18), tube (19), and clip (20) .
Show/hide table
Illustration 7 | g01079468 |
- Remove clips (21) .
Show/hide table
Illustration 8 | g01079470 |
View from bottom of air cleaner |
- Install Tooling (A) and Tooling (B) to the cover. Fasten a suitable lifting device to Tooling (A) and Tooling (B). Remove bolts (22) .
Show/hide table
Illustration 9 | g01079471 |
- Remove bolt (23). Remove the air filter assembly. The weight of the air filter assembly is approximately 68 kg (150 lb).
Show/hide table
Illustration 10 | g01079473 |
- Remove bolts (24) .
Show/hide table
Illustration 11 | g01079477 |
- Remove bolts (25). Remove plate (26) .
- Remove bolts (27) and air cleaner (28) .
Installation Procedure
- Install air cleaner (28). Install bolts (27) .
Show/hide table
Illustration 12 | g01079477 |
- Install plate (26) and bolts (25) .
- Install bolt (24) .
- Use Tooling (A), Tooling (B) and a suitable lifting device in order to install the air filter assembly. The weight of the air filter assembly is approximately 68 kg (150 lb). Install bolt (23) .
Show/hide table
Illustration 13 | g01079471 |
Show/hide table
Illustration 14 | g01079473 |
- Install bolts (22). Remove Tooling (A) and Tooling (B) .
- Install clips (21) .
Show/hide table
Illustration 15 | g01079470 |
View from bottom of air cleaner |
- Connect harness (18), tube (19), and clip (20) .
Show/hide table
Illustration 16 | g01079468 |
- Install bolts (15) and clip (16) behind mat (17) (not shown).
Show/hide table
Illustration 17 | g01079467 |
- Install U-bolts (12). Connect both ends of dryer (10). Install left guard (9) .
Show/hide table
Illustration 18 | g01079466 |
- Install guard (14). Connect hose (11), dust ejector (8) and strip (13) .
- Install Tooling (A) and a suitable lifting device to cover (4). The weight of cover (4) is approximately 29 kg (65 lb).
Show/hide table
Illustration 19 | g01079465 |
Show/hide table
Illustration 20 | g01079504 |
- Install prop rod (7) and cover (4) .
- Connect tube assembly (5) and clip (6) to cover (4) .
Show/hide table
Illustration 21 | g01079464 |
- Install cover (1), cover (2), and bolts (3) on both sides.
Show/hide table
Illustration 22 | g01079440 |
Caterpillar Information System:
345C MHPU Mobile Hydraulic Power Unit Cooling System Coolant Sample (Level 1) - Obtain
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Lifting Capacities - M316C Excavator with a VA Boom
2011/11/23 New Test ECM Is Now Available for Certain Cat Machines {0785, 1901, 1920, 7610}
2004/07/05 New Test ECM Available for Hydraulics {7610}
312C Excavator Lifting Capacities - 312C L with a VA Boom and a 2.49 m Blade
312C Excavator Lifting Capacities - 312C with a Reach Boom
2004/06/07 An Improved Service Brake Control Valve Is Available {1435, 4265, 5051}
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
318C and 319C Excavators Engine Oil Sample - Obtain
325D and 329D Excavators Air Conditioning and Heating Control
C11 and C13 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
M325C Material Handler Hydraulic System Oil Sample - Obtain
345C MHPU Mobile Hydraulic Power Unit Cooling System Coolant (ELC) - Change
312C Excavator Lifting Capacities - 312C L with a Reach Boom and a 2.49 m Blade
312C Excavator Lifting Capacities - 312C L with a Reach Boom and a 2.78 m Blade
312C Excavator Lifting Capacities - 312C L with a VA Boom and No Blade
312C Excavator Lifting Capacities - 312C L with a VA Boom and a 2.78 m Blade
2005/03/07 The Operator Monitor Gp Is Improved {7490}
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Muffler - Remove and Install
318C and 319C Excavators Machine System Specifications Return and Oil Filter Lines
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Water Temperature Regulator - Remove and Install
315C Excavator Fire Extinguisher Location
2004/06/21 New Parts are Available for the Cold Planers {5082, 6634}
315C Excavator Daily Inspection