C15 and C18 Engines for Caterpillar Built Machines Caterpillar


Valve Mechanism Cover - Remove and Install

Usage:

826K 232

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 1g01078498

  1. 拆下螺栓 (1)。

  2. 拆下气门机构盖 (2)。

安装步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损和缩短部件寿命。




    图 2g01078533

  1. 将气门机构盖 (2) 定位到气门室盖底座上。 按照图 2 中所示的数字顺序将螺栓 (1) 上紧到 18 ± 3 N·m (13 ± 2 lb ft) 的扭矩。

Caterpillar Information System:

318C and 319C Excavators Engine Oil Sample - Obtain
325D and 329D Excavators Air Conditioning and Heating Control
C11 and C13 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
M325C Material Handler Hydraulic System Oil Sample - Obtain
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Service Hour Meter
324D and 326D Excavators Work Tool Control Pedal - If Equipped
2004/06/21 New Procedure Will Improve Recirculation Filter's Serviceability {7342}
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397} Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
M313C and M315C Excavators Lifting Capacities - M315C Excavator with a Offset Boom (Wide Axle and Wide Dozer)
2006/02/13 Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
Supplemental Product Support Literature for the Field Installation of a 20 kW Right Front Corner Mounted Generator Set ( 223-4514 Hydraulic Generator Arrangement) and Operation Instructions {1404, 4450, 5050, 7000} Supplemental Product Support Literature for the Field Installation of a 20 kW Right Front Corner Mounted Generator Set ( 223-4514 Hydraulic Generator Arrangement) and Operation Instructions {1404, 4450, 5050, 7000}
2004/06/01 A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
2004/06/07 An Improved Service Brake Control Valve Is Available {1435, 4265, 5051}
312C Excavator Lifting Capacities - 312C with a Reach Boom
312C Excavator Lifting Capacities - 312C L with a VA Boom and a 2.49 m Blade
2004/07/05 New Test ECM Available for Hydraulics {7610}
2011/11/23 New Test ECM Is Now Available for Certain Cat Machines {0785, 1901, 1920, 7610}
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers Lifting Capacities - M316C Excavator with a VA Boom
345C MHPU Mobile Hydraulic Power Unit Cooling System Coolant Sample (Level 1) - Obtain
826H Landfill Compactor, 825H Soil Compactor and 824H Wheel Dozer Engine Supplement Air Cleaner - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Cooling System Coolant (ELC) - Change
312C Excavator Lifting Capacities - 312C L with a Reach Boom and a 2.49 m Blade
312C Excavator Lifting Capacities - 312C L with a Reach Boom and a 2.78 m Blade
312C Excavator Lifting Capacities - 312C L with a VA Boom and No Blade
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.