New Procedure Will Improve Recirculation Filter's Serviceability {7342}
- Excavator:
- 322C (S/N: BPH1-UP; BKJ1-UP; HEK1-680; CAM1-UP; C3R1-314; LAR1-221; SLX1-UP; CBY1-UP)
- 325C (S/N: S2C1-160; BFE1-1358; M2K1-307; G1L1-219; S3M1-335; Y4P1-405)
- 330C (S/N: D3C1-257; B1K1-195; B2L1-220; B3M1-198; B4N1-198; DKY1-2369)
A new procedure has been developed which will improve the serviceability of the 185-8154 Recirculation Filter. To improve the serviceability of the 185-8154 Recirculation Filter, perform the following steps:
- On the upper half of the 177-6706 Case, cut away the top rib. Refer to Illustration 1.
Show/hide table
 | |
| Illustration 1 | g01078847 |
(1) 177-6706 Case (2) Cut away top rib of plastic housing. (3) Add 5P-5639 Seal to both sides of filter track (upper and lower tracks). | |
- Add 200 mm (7.8 inches) of 5P-5639 Seal to each side of the filter retaining track (upper and lower tracks). Adding this seal will prevent filter misalignment and binding.
Caterpillar Information System:
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397} Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
M313C and M315C Excavators Lifting Capacities - M315C Excavator with a Offset Boom (Wide Axle and Wide Dozer)
2006/02/13 Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
Supplemental Product Support Literature for the Field Installation of a 20 kW Right Front Corner Mounted Generator Set ( 223-4514 Hydraulic Generator Arrangement) and Operation Instructions {1404, 4450, 5050, 7000} Supplemental Product Support Literature for the Field Installation of a 20 kW Right Front Corner Mounted Generator Set ( 223-4514 Hydraulic Generator Arrangement) and Operation Instructions {1404, 4450, 5050, 7000}
2004/06/01 A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
2004/06/14 New Harder Cylinder Pistons Are Available {5456, 5457, 5458}
2004/06/14 An Improved Bushing is Now Available for Mini Hydraulic Excavators {6508}
2004/06/21 A New Washer Prevents Oil Leakage From The Hydraulic Pump {507G, 5084}
2004/07/05 243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
325D and 329D Excavators Indicators and Gauges - Test
2004/06/28 210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770}
324D and 326D Excavators Work Tool Control Pedal - If Equipped
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Service Hour Meter
M325C Material Handler Hydraulic System Oil Sample - Obtain
C11 and C13 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
325D and 329D Excavators Air Conditioning and Heating Control
318C and 319C Excavators Engine Oil Sample - Obtain
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
2004/06/07 An Improved Service Brake Control Valve Is Available {1435, 4265, 5051}
312C Excavator Lifting Capacities - 312C with a Reach Boom
312C Excavator Lifting Capacities - 312C L with a VA Boom and a 2.49 m Blade
2004/07/05 New Test ECM Available for Hydraulics {7610}
2011/11/23 New Test ECM Is Now Available for Certain Cat Machines {0785, 1901, 1920, 7610}