Two Adjustment Gauges Help the Technician Set the Lash for the Variable Valve Actuators {0703, 0763, 1100, 1209}
- Agricultural Tractor:
- MT855 (S/N: A3A1-UP)
- Engine:
- C-15 (S/N: Z2C1-UP; BEM1-UP)
- Excavator:
- 365C (S/N: LHX1-UP)
- C13 (S/N: KCB1-UP)
- C15 (S/N: BXS1-UP)
Show/hide table
 | |
| Illustration 1 | g01078554 |
Two adjustment gauges help the technician set the valve lash for the variable valve actuators in the engines in the above products. The adjustment gauges have offset handles that allow easy access for the adjustment. The 228-3610 Feeler Gauge is used to set the valve lash on C-15 Engines. The feeler gauge has 22 blades. The blades range from 0.004 inch to 0.027 inch thick. The 235-0032 Valve Lash Gauge is used to set the valve lash on C-13 Engines. The valve lash gauge has two blades. The blades are 0.024 inch thick and 0.034 inch thick, respectively.
Caterpillar Information System:
Supplemental Product Support Literature for the Field Installation of a 20 kW Right Front Corner Mounted Generator Set ( 223-4514 Hydraulic Generator Arrangement) and Operation Instructions {1404, 4450, 5050, 7000} Supplemental Product Support Literature for the Field Installation of a 20 kW Right Front Corner Mounted Generator Set ( 223-4514 Hydraulic Generator Arrangement) and Operation Instructions {1404, 4450, 5050, 7000}
2004/06/01 A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
C13, C15, and C18 Tier 4 Final Engines Exhaust Manifold
2004/06/14 New Harder Cylinder Pistons Are Available {5456, 5457, 5458}
2004/06/14 An Improved Bushing is Now Available for Mini Hydraulic Excavators {6508}
2004/06/21 A New Washer Prevents Oil Leakage From The Hydraulic Pump {507G, 5084}
2004/07/05 243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
325D and 329D Excavators Indicators and Gauges - Test
2004/06/28 210-6990 Pressure Gauge (LCD Display, 0 to 500-PSI) Is Available for Use by Technicians {0770}
325D and 329D Excavators Operation Information
325D and 329D Excavators Engine and Machine Warm-Up
M313C and M315C Excavators Lifting Capacities - M315C Excavator with a One-Piece Boom (Wide Axle and Wide Dozer)
M313C and M315C Excavators Lifting Capacities - M315C Excavator with a Offset Boom (Wide Axle and Wide Dozer)
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397} Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
2004/06/21 New Procedure Will Improve Recirculation Filter's Serviceability {7342}
324D and 326D Excavators Work Tool Control Pedal - If Equipped
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Service Hour Meter
M325C Material Handler Hydraulic System Oil Sample - Obtain
C11 and C13 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
325D and 329D Excavators Air Conditioning and Heating Control
318C and 319C Excavators Engine Oil Sample - Obtain
C15 and C18 Engines for Caterpillar Built Machines Valve Mechanism Cover - Remove and Install
2004/06/07 An Improved Service Brake Control Valve Is Available {1435, 4265, 5051}
312C Excavator Lifting Capacities - 312C with a Reach Boom