312C Excavator Caterpillar

Lifting Capacities - 312C L with a VA Boom and No Blade

Usage:

312C BWH

Show/hide table




Illustration 1	g01055537
(H) Height (F) Lifting capacity over the front or over the rear of the machine (S) Lifting capacity over the side of the machine (R) Reach

Show/hide table

Table 1
312C L Excavator with a VA boom, a 1.8 m (6 ft 8 inch) stick, a quick coupler, and 600 mm (2 ft 0 inch) triple grouser track shoes ⁽¹⁾ All lifting capacities are in kilograms.
Maximum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m					3720 ⁽³⁾						2980 ⁽³⁾		3.36
6.0 m					4150 ⁽³⁾		3790 ⁽³⁾	3710			2230 ⁽³⁾		5.27
4.5 m					5080 ⁽³⁾		4800 ⁽³⁾	3770 ⁽³⁾	3410 ⁽³⁾	2220	2010 ⁽³⁾		6.28
3.0 m					7840 ⁽³⁾	6730	5310 ⁽³⁾	3710	3520	2210	1980 ⁽³⁾	1700	6.83
1.5 m			6580 ⁽³⁾		8430 ⁽³⁾	6560	5400	3520	3440	2140	2060 ⁽³⁾	1590	7.01
0.0 m			6430 ⁽³⁾		8740 ⁽³⁾	6080	5430	3280	3330	2030	2280 ⁽³⁾	1610	6.86
-1.5 m	7060 ⁽³⁾		6580 ⁽³⁾		9150 ⁽³⁾	5800	5240	3120	3260	1960	2730 ⁽³⁾	1800	6.36
-3.0 m			7770 ⁽³⁾		8010 ⁽³⁾	5780	4250 ⁽³⁾	3030
Minimum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m					3400 ⁽³⁾						2980 ⁽³⁾		3.36
6.0 m					4080 ⁽³⁾		2340 ⁽³⁾				2230 ⁽³⁾		5.27
4.5 m					4870 ⁽³⁾		2430 ⁽³⁾		2130 ⁽³⁾		2010 ⁽³⁾	2010	6.28
3.0 m					4890 ⁽³⁾		3530 ⁽³⁾	3400	2130 ⁽³⁾		1980 ⁽³⁾	1700	6.83
1.5 m			4970 ⁽³⁾		6140 ⁽³⁾	5740	4500 ⁽³⁾	3140	2480 ⁽³⁾	2040	2060 ⁽³⁾	1590	7.01
0.0 m			4140 ⁽³⁾		5620 ⁽³⁾	5410	5070	2960	3190 ⁽³⁾	1960	2280 ⁽³⁾	1610	6.86
-1.5 m	6890 ⁽³⁾		6310 ⁽³⁾		6550 ⁽³⁾	5420	4860 ⁽³⁾	2910	3230	1940	2730 ⁽³⁾	1800	6.36
-3.0 m			6760 ⁽³⁾		5290 ⁽³⁾		3410 ⁽³⁾	2980

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
^( 2 )	For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
^( 3 )	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 2
312C L Excavator with a VA boom, a 2.25 m (7 ft 5 inch) stick, a quick coupler, and 600 mm (2 ft 0 inch) triple grouser track shoes ⁽¹⁾ All lifting capacities are in kilograms.
Maximum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m					3550 ⁽³⁾						2260 ⁽³⁾		4.11
6.0 m							3740 ⁽³⁾				1790 ⁽³⁾		5.77
4.5 m					3930 ⁽³⁾		4190 ⁽³⁾	3800	3530 ⁽³⁾	2310 ⁽³⁾	1630 ⁽³⁾		6.71
3.0 m					7340 ⁽³⁾	6780	5120 ⁽³⁾	3720	3580	2290	1610 ⁽³⁾	1580	7.22
1.5 m			8640 ⁽³⁾		8660 ⁽³⁾	6580	5430	3610	3500	2210	1670 ⁽³⁾	1480	7.39
0.0 m	5680 ⁽³⁾		6420 ⁽³⁾		8660 ⁽³⁾	6240	5420 ⁽³⁾	3350	3390	2090	1840 ⁽³⁾	1490	7.25
-1.5 m	6600 ⁽³⁾		6580 ⁽³⁾		9130 ⁽³⁾	5870	5300	3170	3290	1990	2170 ⁽³⁾	1640	6.78
-3.0 m	6370 ⁽³⁾		7150 ⁽³⁾		8680 ⁽³⁾	5800	5100 ⁽³⁾	3050
Minimum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m					3530 ⁽³⁾						2260 ⁽³⁾		4.11
6.0 m							1850 ⁽³⁾				1790 ⁽³⁾		5.77
4.5 m					3770 ⁽³⁾		3090 ⁽³⁾		1650 ⁽³⁾		1630 ⁽³⁾		6.71
3.0 m					4950 ⁽³⁾		3070 ⁽³⁾		1920 ⁽³⁾		1610 ⁽³⁾	1580	7.22
1.5 m			3790 ⁽³⁾		5360 ⁽³⁾		4120 ⁽³⁾	3210	2060 ⁽³⁾		1670 ⁽³⁾	1480	7.39
0.0 m	5630 ⁽³⁾		3360 ⁽³⁾		6190 ⁽³⁾	5500	5120	3010	2890 ⁽³⁾	1980	1840 ⁽³⁾	1490	7.25
-1.5 m	6270 ⁽³⁾		4770 ⁽³⁾		6850 ⁽³⁾	5440	5030	2930	3240	1940	2170 ⁽³⁾	1640	6.78
-3.0 m	6330 ⁽³⁾		6510 ⁽³⁾		5290 ⁽³⁾		3690 ⁽³⁾	2960

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
^( 2 )	For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
^( 3 )	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 3
312C L Excavator with a VA boom, a 2.7 m (8 ft 10 inch) stick, a quick coupler, and 600 mm (2 ft 0 inch) triple grouser track shoes ⁽¹⁾ All lifting capacities are in kilograms.
Maximum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		7.5 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m							2670 ⁽³⁾						1890 ⁽³⁾		4.89
6.0 m							3190 ⁽³⁾		2400 ⁽³⁾	2310			1570 ⁽³⁾		6.34
4.5 m							3440 ⁽³⁾		3240 ⁽³⁾	2370			1460 ⁽³⁾		7.2
3.0 m					4800 ⁽³⁾		4540 ⁽³⁾	3720	3590	2350	2120 ⁽³⁾	1480	1450 ⁽³⁾	1400	7.68
1.5 m			10560 ⁽³⁾		8450 ⁽³⁾	6560 ⁽³⁾	5410	3650	3540	2250	2370	1450	1510 ⁽³⁾	1310	7.84
0.0 m	4320 ⁽³⁾		7020 ⁽³⁾		8680 ⁽³⁾	6370	5340	3390	3420	2120	2310	1390	1650 ⁽³⁾	1320	7.71
-1.5 m	6010 ⁽³⁾		6810 ⁽³⁾		8980 ⁽³⁾	5890	5300	3160	3280	1980			1930 ⁽³⁾	1430	7.27
-3.0 m	6330 ⁽³⁾		7460 ⁽³⁾		8980 ⁽³⁾	5720	5140	3020	3160 ⁽³⁾	1920			2160 ⁽³⁾	1730	6.45
-4.5 m			9300 ⁽³⁾		5950 ⁽³⁾	5720
Minimum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		7.5 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m							2040 ⁽³⁾						1890 ⁽³⁾		4.89
6.0 m							2910 ⁽³⁾		1600 ⁽³⁾				1570 ⁽³⁾		6.34
4.5 m							3120 ⁽³⁾		1510 ⁽³⁾				1460 ⁽³⁾		7.2
3.0 m					4700 ⁽³⁾		3010 ⁽³⁾		1750 ⁽³⁾		1670 ⁽³⁾	1470	1450 ⁽³⁾	1400	7.68
1.5 m			6330 ⁽³⁾		4890 ⁽³⁾		3540 ⁽³⁾	3250	1770 ⁽³⁾		1600 ⁽³⁾	1430	1510 ⁽³⁾	1310	7.84
0.0 m	3860 ⁽³⁾		3110 ⁽³⁾		7140 ⁽³⁾	5510	4790 ⁽³⁾	3000	2640 ⁽³⁾	1960	1810 ⁽³⁾	1380	1650 ⁽³⁾	1320	7.71
-1.5 m	4870 ⁽³⁾		3800 ⁽³⁾		7200 ⁽³⁾	5350	4980	2880	3190	1890			1930 ⁽³⁾	1430	7.27
-3.0 m	6220 ⁽³⁾		6410 ⁽³⁾		5920 ⁽³⁾	5400	4240 ⁽³⁾	2870	2760 ⁽³⁾	1900			2160 ⁽³⁾	1730	6.45
-4.5 m			8960 ⁽³⁾		5430 ⁽³⁾

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
^( 2 )	For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
^( 3 )	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 4
312C L Excavator with a VA boom, a 1.8 m (6 ft 8 inch) stick, a quick coupler, and 850 mm (2 ft 9 inch) triple grouser track shoes ⁽¹⁾ All lifting capacities are in kilograms.
Maximum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m					3720 ⁽³⁾						2980 ⁽³⁾		3.36
6.0 m					4150 ⁽³⁾		3790 ⁽³⁾				2230 ⁽³⁾		5.27
4.5 m					5080 ⁽³⁾		4800 ⁽³⁾	3900	3410 ⁽³⁾	2320	2010 ⁽³⁾		6.28
3.0 m					7840 ⁽³⁾	6950 ⁽³⁾	5310 ⁽³⁾	3840 ⁽³⁾	3680	2320	1980 ⁽³⁾	1790	6.83
1.5 m			6580 ⁽³⁾		8430 ⁽³⁾	6760	5590	3670	3600	2250	2060 ⁽³⁾	1670	7.01
0.0 m			6430 ⁽³⁾		8740 ⁽³⁾	6360	5600 ⁽³⁾	3430	3490	2140	2280 ⁽³⁾	1700	6.86
-1.5 m	7060 ⁽³⁾		6580 ⁽³⁾		9150 ⁽³⁾	6070	5490	3270	3420	2070	2730 ⁽³⁾	1900	6.36
-3.0 m			7770 ⁽³⁾		8010 ⁽³⁾	6060	4250 ⁽³⁾	3180
Minimum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m					3400 ⁽³⁾						2980 ⁽³⁾		3.36
6.0 m					4080 ⁽³⁾		2340 ⁽³⁾				2230 ⁽³⁾		5.27
4.5 m					4870 ⁽³⁾		2430 ⁽³⁾		2130 ⁽³⁾		2010 ⁽³⁾		6.28
3.0 m					4890 ⁽³⁾		3530 ⁽³⁾		2130 ⁽³⁾		1980 ⁽³⁾	1790	6.83
1.5 m			4970 ⁽³⁾		6140 ⁽³⁾	6010	4500 ⁽³⁾	3290	2480 ⁽³⁾	2150	2060 ⁽³⁾	1670	7.01
0.0 m			4140 ⁽³⁾		5620 ⁽³⁾		5310	3110	3190 ⁽³⁾	2060	2280 ⁽³⁾	1700	6.86
-1.5 m	6890 ⁽³⁾		6310 ⁽³⁾		6550 ⁽³⁾	5690	4860 ⁽³⁾	3060	3290 ⁽³⁾	2040	2730 ⁽³⁾	1900	6.36
-3.0 m			6760 ⁽³⁾		5290 ⁽³⁾		3410 ⁽³⁾	3130

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
^( 2 )	For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
^( 3 )	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 5
312C L Excavator with a VA boom, a 2.25 m (7 ft 5 inch) stick, a quick coupler, and 850 mm (2 ft 9 inch) triple grouser track shoes ⁽¹⁾ All lifting capacities are in kilograms.
Maximum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m					3550 ⁽³⁾						2260 ⁽³⁾		4.11
6.0 m							3740 ⁽³⁾				1790 ⁽³⁾		5.77
4.5 m					3930 ⁽³⁾		4190 ⁽³⁾	3930	3530 ⁽³⁾	2410	1630 ⁽³⁾		6.71
3.0 m					7340 ⁽³⁾	7020	5120 ⁽³⁾	3860	3740	2390	1610 ⁽³⁾		7.22
1.5 m			8640 ⁽³⁾		8660 ⁽³⁾	6790	5620	3760	3660	2320	1670 ⁽³⁾	1560	7.39
0.0 m	5680 ⁽³⁾		6420 ⁽³⁾		8660 ⁽³⁾	6510	5570	3500	3540	2200	1840 ⁽³⁾	1570	7.25
-1.5 m	6600 ⁽³⁾		6580 ⁽³⁾		9130 ⁽³⁾	6150	5540	3320	3440	2090	2170 ⁽³⁾	1730	6.78
-3.0 m	6370 ⁽³⁾		7150 ⁽³⁾		8680 ⁽³⁾	6070	5100 ⁽³⁾	3200
Minimum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m					3530 ⁽³⁾						2260 ⁽³⁾		4.11
6.0 m							1850 ⁽³⁾				1790 ⁽³⁾		5.77
4.5 m					3770 ⁽³⁾		3090 ⁽³⁾		1650 ⁽³⁾		1630 ⁽³⁾		6.71
3.0 m					4950 ⁽³⁾		3070 ⁽³⁾		1920 ⁽³⁾		1610 ⁽³⁾		7.22
1.5 m			3790 ⁽³⁾		5360 ⁽³⁾		4120 ⁽³⁾	3370	2060 ⁽³⁾		1670 ⁽³⁾	1560	7.39
0.0 m	5630 ⁽³⁾		3360 ⁽³⁾		6190 ⁽³⁾	5770	5230 ⁽³⁾	3160	2890 ⁽³⁾	2090	1840 ⁽³⁾	1570	7.25
-1.5 m	6270 ⁽³⁾		4770 ⁽³⁾		6850 ⁽³⁾	5710	5180 ⁽³⁾	3080	3400	2050	2170 ⁽³⁾	1730	6.78
-3.0 m	6330 ⁽³⁾		6510 ⁽³⁾		5290 ⁽³⁾		3690 ⁽³⁾	3110

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
^( 2 )	For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
^( 3 )	Capacity is limited by hydraulics rather than by a tipping load.

Show/hide table

Table 6
312C L Excavator with a VA boom, a 2.7 m (8 ft 10 inch) stick, a quick coupler, and 850 mm (2 ft 9 inch) triple grouser track shoes ⁽¹⁾ All lifting capacities are in kilograms.
Maximum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		7.5 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m							2670 ⁽³⁾						1890 ⁽³⁾		4.89
6.0 m							3190 ⁽³⁾		2400 ⁽³⁾				1570 ⁽³⁾		6.34
4.5 m							3440 ⁽³⁾		3240 ⁽³⁾	2470			1460 ⁽³⁾		7.2
3.0 m					4800 ⁽³⁾		4540 ⁽³⁾	3850	3720	2450	2120 ⁽³⁾	1560	1450 ⁽³⁾		7.68
1.5 m			10560 ⁽³⁾		8450 ⁽³⁾	6790 ⁽³⁾	5450 ⁽³⁾	3780	3680	2360	2490	1530	1510 ⁽³⁾	1390	7.84
0.0 m	4320 ⁽³⁾		7020 ⁽³⁾		8680 ⁽³⁾	6650	5510	3540	3580	2230	2430	1470	1650 ⁽³⁾	1400	7.71
-1.5 m	6010 ⁽³⁾		6810 ⁽³⁾		8980 ⁽³⁾	6160	5550	3310	3440	2090			1930 ⁽³⁾	1520	7.27
-3.0 m	6330 ⁽³⁾		7460 ⁽³⁾		8980 ⁽³⁾	5990	5380	3170	3160 ⁽³⁾	2030			2160 ⁽³⁾	1830	6.45
-4.5 m			9300 ⁽³⁾		5950 ⁽³⁾
Minimum lifting capacities for the VA boom ⁽²⁾
H	R
	0 m		1.5 m		3.0 m		4.5 m		6.0 m		7.5 m		Maximum Reach
	F	S	F	S	F	S	F	S	F	S	F	S	F	S	m
7.5 m							2040 ⁽³⁾						1890 ⁽³⁾		4.89
6.0 m							2910 ⁽³⁾		1600 ⁽³⁾				1570 ⁽³⁾		6.34
4.5 m							3120 ⁽³⁾		1510 ⁽³⁾				1460 ⁽³⁾		7.2
3.0 m					4700 ⁽³⁾		3010 ⁽³⁾		1750 ⁽³⁾		1670 ⁽³⁾	1550	1450 ⁽³⁾		7.68
1.5 m			6330 ⁽³⁾		4890 ⁽³⁾		3540 ⁽³⁾	3400	1770 ⁽³⁾		1600 ⁽³⁾	1510	1510 ⁽³⁾	1390	7.84
0.0 m	3860 ⁽³⁾		3110 ⁽³⁾		7140 ⁽³⁾	5780	4790 ⁽³⁾	3160	2640 ⁽³⁾	2070	1810 ⁽³⁾	1460	1650 ⁽³⁾	1400	7.71
-1.5 m	4870 ⁽³⁾		3800 ⁽³⁾		7200 ⁽³⁾	5620	5220	3030	3220 ⁽³⁾	2000			1930 ⁽³⁾	1520	7.27
-3.0 m	6220 ⁽³⁾		6410 ⁽³⁾		5920 ⁽³⁾	5670	4240 ⁽³⁾	3020	2760 ⁽³⁾	2010			2160 ⁽³⁾	1830	6.45
-4.5 m			8960 ⁽³⁾		5430 ⁽³⁾

Show/hide table

^( 1 )	Lift capacities are based on "SAE J1097" and "ISO 10567" standards. The listed capacities do not exceed 87 percent of the hydraulic lifting capacity or 75 percent of the tipping capacity. Weight of all lifting accessories must be subtracted from the lifting capacities.
^( 2 )	For a specific reach and a specific height, different lifting capacities can be achieved. These different lifting capacities depend on the relative positions of the VA boom, the stick, and the bucket cylinder. For this reason, the maximum and the minimum lifting capacity at each location is provided. Maximum values were obtained with the VA boom in the optimum position. Any movement of the VA boom will affect the lifting capacity.
^( 3 )	Capacity is limited by hydraulics rather than by a tipping load.