Engine Oil Filter - Change
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
Show/hide table
Illustration 1 | g00655742 |
Oil filter |
During normal operation, the oil filter is self-cleaning. However, the centrifugal elements must be changed periodically. The internal parts must be cleaned and inspected.
Monitor the oil pressure frequently during operation. Keep a record of the oil filter differential pressure in order to compare the current readings to the earlier readings.
Service the oil filter according to the instructions that are provided by the OEM of the filter.
Caterpillar Information System:
3126B Engine for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules
3608 Engine Engine Air Cleaner Element - Replace
3608 Engine Before Starting Engine
3608 Engine Cooling System Coolant Level - Check
3608 Engine Inlet Valve Lubrication Metering Pump
G3304 and G3306 Engines Pressure Switch
3608 Engine Barring Device - Lubricate
3608 Engine Air Shutoff - Test
3608 Engine Control Panel
3608 Engine Aftercooler Condensation - Drain
3126 Truck Engine Military Inlet and Exhaust Valves - Remove and Install
G3304 and G3306 Engines Coolant Temperature Contactor
3608 Engine Starting the Engine
3608 Engine Product Description
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298} Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
G3304 and G3306 Engines Vacuum Gauge
3608 Engine Governor Actuator Oil - Replace
3608 Engine Governor Actuator Linkage - Check
3524B Engines for 797 and 797B Off-Highway Trucks Charging System
G3304 and G3306 Engines Pressure Gauge - Engine Oil
3608 Engine Accessory Drive
3608 Engine Model View Illustrations
3608 Engine Safety Messages
3608 Engine Gauges and Indicators