Governor Actuator Linkage - Check
Check the governor actuator linkage for proper operation. Refer to the Systems Operation and Training and Adjusting Manuals for the procedure to adjust the governor actuator linkage.
Lubricate the Fuel Control Linkage
Show/hide table
| |
| Illustration 1 | g00653838 |
Lubricate grease fittings (1) with MPG or equivalent grease.
Caterpillar Information System:
3608 Engine Governor Actuator Oil - Replace
G3304 and G3306 Engines Vacuum Gauge
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298} Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
3608 Engine Product Description
3608 Engine Starting the Engine
3608 Engine Engine Oil Filter - Change
3126B Engine for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules
3608 Engine Engine Air Cleaner Element - Replace
3608 Engine Before Starting Engine
3608 Engine Cooling System Coolant Level - Check
3608 Engine Inlet Valve Lubrication Metering Pump
G3304 and G3306 Engines Pressure Switch
3524B Engines for 797 and 797B Off-Highway Trucks Charging System
G3304 and G3306 Engines Pressure Gauge - Engine Oil
3608 Engine Accessory Drive
3608 Engine Model View Illustrations
3608 Engine Safety Messages
3608 Engine Gauges and Indicators
Electronic Modular Control Panel II (EMCP II) Component Location - For 3412C PEEC Engines
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0001</B> Generator through <B>5N-0025</B> Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>102-2415</B> Generator through <B>108-3052</B> Generator
3034 Engine for Caterpillar Built Machines Camshaft Bearings - Remove
SR500 Generators Varistor - Test
3114, 3116, and 3126 Engines for Caterpillar Built Machines Camshaft - Remove