Product Description
The 3608 Generator Set Engine is designed to provide electrical power generation.
Engine efficiency and maximum utilization of engine performance depend on the adherence to proper operation and maintenance recommendations. This includes use of the recommended lubricants, fuels, and coolant/antifreezes.
For the engine maintenance that is required, see this Operation and Maintenance Manual, "Maintenance Interval Schedule" (Maintenance Section).
Caterpillar Information System:
3608 Engine Starting the Engine
3608 Engine Engine Oil Filter - Change
3126B Engine for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules
3608 Engine Engine Air Cleaner Element - Replace
3608 Engine Before Starting Engine
3608 Engine Cooling System Coolant Level - Check
3608 Engine Inlet Valve Lubrication Metering Pump
G3304 and G3306 Engines Pressure Switch
3608 Engine Barring Device - Lubricate
3608 Engine Air Shutoff - Test
3608 Engine Control Panel
3608 Engine Aftercooler Condensation - Drain
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298} Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
G3304 and G3306 Engines Vacuum Gauge
3608 Engine Governor Actuator Oil - Replace
3608 Engine Governor Actuator Linkage - Check
3524B Engines for 797 and 797B Off-Highway Trucks Charging System
G3304 and G3306 Engines Pressure Gauge - Engine Oil
3608 Engine Accessory Drive
3608 Engine Model View Illustrations
3608 Engine Safety Messages
3608 Engine Gauges and Indicators
Electronic Modular Control Panel II (EMCP II) Component Location - For 3412C PEEC Engines
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0001</B> Generator through <B>5N-0025</B> Generator