Vacuum Gauge
Show/hide table
Illustration 1 | g01651575 |
Show/hide table
Vacuum Gauge Reading     | ||
Calibration point     | Pressure     | Direction of pointer travel.     |
A     | 0 ± 3 kPa (0 ± 0.4 psi)     |
Counterclockwise     |
B     | 33.8 ± 3.0 kPa (4.9 ± 0.4 psi)     |
Counterclockwise     |
C     | 67.5 ± 2.0 kPa (9.8 ± 0.3 psi)     |
Counterclockwise     |
D     | 101.3 ± 3.0 kPa (14.7 ± 0.4 psi)     |
Counterclockwise     |
Show/hide table
Illustration 2 | g01651577 |
Note: The end of the orifice must not protrude beyond the end of the fitting.
(5) Final installation torque for two orifices ... 1.00 ± 0.25 N·m (9 ± 2 lb in)
Caterpillar Information System:
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298} Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
3608 Engine Product Description
3608 Engine Starting the Engine
3608 Engine Engine Oil Filter - Change
3126B Engine for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules
3608 Engine Engine Air Cleaner Element - Replace
3608 Engine Before Starting Engine
3608 Engine Cooling System Coolant Level - Check
3608 Engine Inlet Valve Lubrication Metering Pump
G3304 and G3306 Engines Pressure Switch
3608 Engine Barring Device - Lubricate
3608 Engine Air Shutoff - Test
3608 Engine Governor Actuator Oil - Replace
3608 Engine Governor Actuator Linkage - Check
3524B Engines for 797 and 797B Off-Highway Trucks Charging System
G3304 and G3306 Engines Pressure Gauge - Engine Oil
3608 Engine Accessory Drive
3608 Engine Model View Illustrations
3608 Engine Safety Messages
3608 Engine Gauges and Indicators
Electronic Modular Control Panel II (EMCP II) Component Location - For 3412C PEEC Engines
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0001</B> Generator through <B>5N-0025</B> Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>102-2415</B> Generator through <B>108-3052</B> Generator
3034 Engine for Caterpillar Built Machines Camshaft Bearings - Remove