Inlet Valve Lubrication Metering Pump
Show/hide table
Illustration 1 | g00467103 |
(1) Adjust the oil flow by using the following procedure:
- Turn both adjusting screws counterclockwise to the full open position.
- Turn both adjusting screws clockwise for 30 Clicks (1 1/2 turns).
(2) Apply 7M-7456 Bearing Mount Compound to the threads of the connector. Tighten the connector to the following torque. ...
(3) Apply 7M-7456 Bearing Mount Compound to the threads of the connector. Tighten the connector to the following torque. ...
(4) Apply 7M-7456 Bearing Mount Compound to the threads of the plugs at assembly.
(5) Apply 7M-7456 Bearing Mount Compound to the threads of the two connectors. Tighten the connectors to the following torque. ...
Caterpillar Information System:
G3304 and G3306 Engines Pressure Switch
3608 Engine Barring Device - Lubricate
3608 Engine Air Shutoff - Test
3608 Engine Control Panel
3608 Engine Aftercooler Condensation - Drain
3126 Truck Engine Military Inlet and Exhaust Valves - Remove and Install
G3304 and G3306 Engines Coolant Temperature Contactor
3608 Engine Engine Speed Governing
C-12, C-15 and C-16 Engines for Caterpillar Built Machines ECM Will Not Accept Factory Passwords
3500B and 3500B High Displacement Generator Set Engines Pinion Clearance Adjustment
3500B and 3500B High Displacement Generator Set Engines Electric Starting System
3524B Engines for 797 and 797B Off-Highway Trucks Alternator Regulator
3608 Engine Cooling System Coolant Level - Check
3608 Engine Before Starting Engine
3608 Engine Engine Air Cleaner Element - Replace
3126B Engine for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules
3608 Engine Engine Oil Filter - Change
3608 Engine Starting the Engine
3608 Engine Product Description
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298} Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
G3304 and G3306 Engines Vacuum Gauge
3608 Engine Governor Actuator Oil - Replace
3608 Engine Governor Actuator Linkage - Check
3524B Engines for 797 and 797B Off-Highway Trucks Charging System