Inlet and Exhaust Valves - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 5S-1330     | 气门弹簧压缩器     | 1     |
开始:
- 拆卸缸盖组件。 请参阅拆解和组装, "缸盖 - 拆卸"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 有关进气阀、排气阀和弹簧的可再用性信息,请参阅再使用零件和修补操作指南, SEBF8002, "气门、气门弹簧、气门旋转器和锁",再使用零件和修补操作指南, SEBF8034, "气门和气门弹簧技术规格"以及再使用零件和修补操作指南, SEBF8162, "测量和修补缸盖组件及相关部件的技术规格"。
- 使用工具 (A) 压缩气门弹簧 (3) 。 拆下挡圈锁 (1) 。
Show/hide table
图 1 | g01011225 |
注: 排气阀的下列部件不同于进气阀部件:弹簧挡圈 (2), 气门弹簧 (3) 和 气门 (5) 。
Show/hide table
图 2 | g01011269 |
- 拆下工具 (A) 。
- 拆下弹簧挡圈 (2) 。 拆下气门弹簧 (3) 。
- 拆下气门密封 (4) 和气门 (5) 。
- 通过重复步骤 1 到 4 拆下其余进气门和排气门。
安装步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 5S-1330     | 气门弹簧压缩器     | 1     |
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
注: 有关进气阀、排气阀和弹簧的可再用性信息,请参阅再使用零件和修补操作指南, SEBF8002, "气门、气门弹簧、气门旋转器和锁",再使用零件和修补操作指南, SEBF8034, "气门和气门弹簧技术规格"以及再使用零件和修补操作指南, SEBF8162, "测量和修补缸盖组件及相关部件的技术规格"。
- 用清洁的机油润滑气门 (5) 。 将气门 (5) 安装到缸盖组件内。 将新气门密封 (4) 安装到气门导管上。
Show/hide table
图 3 | g01011225 |
- 将以下各项放到气门杆上:气门弹簧 (3) 和 弹簧挡圈 (2) 。
- 使用工具 (A) 压缩气门弹簧 (3) 。 安装挡圈锁 (1) 。
Show/hide table
当松开气门弹簧压缩器时,气门锁片可能会从气门中弹出。 确保气门锁片正确安装在气门杆上。 为了帮助避免人员伤害,在安装气门时,始终应避开气门锁片和气门弹簧的前方。 |
注: 安装时可以使用少量的润滑脂以保持挡圈锁 (1) 就位。
Show/hide table
图 4 | g01011269 |
- 通过重复步骤 1 到 3 安装其余进气门和排气门。
End By: 安装缸盖组件。 请参阅 拆解和组装, "缸盖 - 安装"。
Caterpillar Information System:
G3304 and G3306 Engines Coolant Temperature Contactor
3608 Engine Engine Speed Governing
C-12, C-15 and C-16 Engines for Caterpillar Built Machines ECM Will Not Accept Factory Passwords
3500B and 3500B High Displacement Generator Set Engines Pinion Clearance Adjustment
3500B and 3500B High Displacement Generator Set Engines Electric Starting System
3524B Engines for 797 and 797B Off-Highway Trucks Alternator Regulator
3114, 3116 and 3126 MUI Engine Governors Governor (Type II) - Assemble
G3500B Engines Inlet Air System - Inspect
3500 Engines For Caterpillar Built Power Modules Test Tools for the Electrical System
G3304 and G3306 Engines Magneto
G3304 and G3306 Engines Magneto
3524B Engines for 797 and 797B Off-Highway Trucks Vibration Damper
3608 Engine Aftercooler Condensation - Drain
3608 Engine Control Panel
3608 Engine Air Shutoff - Test
3608 Engine Barring Device - Lubricate
G3304 and G3306 Engines Pressure Switch
3608 Engine Inlet Valve Lubrication Metering Pump
3608 Engine Cooling System Coolant Level - Check
3608 Engine Before Starting Engine
3608 Engine Engine Air Cleaner Element - Replace
3126B Engine for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules
3608 Engine Engine Oil Filter - Change
3608 Engine Starting the Engine