Inlet Air System - Inspect
Inspect the components of the air inlet system for the following conditions:
- Cracks
- Leaks
- Loose connections
Show/hide table
| |
| Illustration 1 | g00774833 |
|
Rubber hoses in the air lines of a G3516B Engine | |
Inspect the following components:
- Piping between the air cleaner and the turbocharger
- Rubber hoses in the air lines
- Turbocharger
- Piping between the turbocharger and the aftercooler
- Aftercooler
- Connection of the aftercooler to the air plenum
- Connection of the air plenum to the cylinder head
Ensure that all of the connections are secure. Ensure that the components are in good condition.
Make repairs, if necessary. For information regarding removal and installation of the components, refer to Service Manual, "Disassembly and Assembly". Consult your Caterpillar dealer for assistance.
Caterpillar Information System:
3500 Engines For Caterpillar Built Power Modules Test Tools for the Electrical System
G3304 and G3306 Engines Magneto
G3304 and G3306 Engines Magneto
3524B Engines for 797 and 797B Off-Highway Trucks Vibration Damper
G3304 and G3306 Engines Magneto
G3304 and G3306 Engines Magneto
G3304 and G3306 Engines Magneto
3508B Engine for Caterpillar Built Machines Flywheel and Flywheel Housing
3524B Engines for 797 and 797B Off-Highway Trucks Cylinder Liner Projection
3524B Engines for 797 and 797B Off-Highway Trucks Cylinder Block
3114, 3116 and 3126 MUI Engine Governors Governor (Type II) - Disassemble
3524B Engines for 797 and 797B Off-Highway Trucks Main Bearings
3114, 3116 and 3126 MUI Engine Governors Governor (Type II) - Assemble
3524B Engines for 797 and 797B Off-Highway Trucks Alternator Regulator
3500B and 3500B High Displacement Generator Set Engines Electric Starting System
3500B and 3500B High Displacement Generator Set Engines Pinion Clearance Adjustment
C-12, C-15 and C-16 Engines for Caterpillar Built Machines ECM Will Not Accept Factory Passwords
3608 Engine Engine Speed Governing
G3304 and G3306 Engines Coolant Temperature Contactor
3126 Truck Engine Military Inlet and Exhaust Valves - Remove and Install
3608 Engine Aftercooler Condensation - Drain
3608 Engine Control Panel
3608 Engine Air Shutoff - Test
3608 Engine Barring Device - Lubricate