Coolant Temperature Contactor
Show/hide table
Illustration 1 | g01663653 |
(1) Final installation torque for the water temperature contactor assembly ... 52 ± 8 N·m (38 ± 6 lb ft)
Actuation temperature ... 98.0 ± 1.5 °C (208 ± 3 °F)
Minimum deactuation temperature ... 91° C (196 °F)
Operating temperature ... −40 to 120 °C (−40 to 248 °F)
Contact position (1-2) ... Normally open below actuation temperature
Contact position (2-3) ... Normally closed below actuation temperature
Caterpillar Information System:
3608 Engine Engine Speed Governing
C-12, C-15 and C-16 Engines for Caterpillar Built Machines ECM Will Not Accept Factory Passwords
3500B and 3500B High Displacement Generator Set Engines Pinion Clearance Adjustment
3500B and 3500B High Displacement Generator Set Engines Electric Starting System
3524B Engines for 797 and 797B Off-Highway Trucks Alternator Regulator
3114, 3116 and 3126 MUI Engine Governors Governor (Type II) - Assemble
G3500B Engines Inlet Air System - Inspect
3500 Engines For Caterpillar Built Power Modules Test Tools for the Electrical System
G3304 and G3306 Engines Magneto
G3304 and G3306 Engines Magneto
3524B Engines for 797 and 797B Off-Highway Trucks Vibration Damper
G3304 and G3306 Engines Magneto
3126 Truck Engine Military Inlet and Exhaust Valves - Remove and Install
3608 Engine Aftercooler Condensation - Drain
3608 Engine Control Panel
3608 Engine Air Shutoff - Test
3608 Engine Barring Device - Lubricate
G3304 and G3306 Engines Pressure Switch
3608 Engine Inlet Valve Lubrication Metering Pump
3608 Engine Cooling System Coolant Level - Check
3608 Engine Before Starting Engine
3608 Engine Engine Air Cleaner Element - Replace
3126B Engine for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules
3608 Engine Engine Oil Filter - Change