Pressure Gauge - Engine Oil
Show/hide table
图 1 | g01651637 |
Show/hide table
标定表     | |
指针位置     | 压力     |
A (1)     | 0 kPa (0 psi)     |
B (2)     | 200 ± 20 kPa (29.0 ± 3.0 psi)     |
C (2)     | 500 ± 50 kPa73 (.0 ± 7.5 psi)     |
D (3)     | 700 kPa (100 psi)     |
Show/hide table
( 1 ) | 压力为零时指针必须触碰第一个刻度。 |
( 2 ) | 轻敲或震动指示器以获得正确的指示。 |
( 3 ) | 指针必须能够在第一个刻度到最后一个刻度的全量程内移动。 |
Show/hide table
图 2 | g01651639 |
(1) 节流孔的最终安装扭矩 ... 6.8 ± 1.4 N·m (60 ± 12 lb in)
Caterpillar Information System:
3524B Engines for 797 and 797B Off-Highway Trucks Charging System
3608 Engine Governor Actuator Linkage - Check
3608 Engine Governor Actuator Oil - Replace
G3304 and G3306 Engines Vacuum Gauge
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298} Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
3608 Engine Product Description
3608 Engine Starting the Engine
3608 Engine Engine Oil Filter - Change
3126B Engine for Caterpillar Built Machines ECM Will Not Communicate with Other Systems or Display Modules
3608 Engine Engine Air Cleaner Element - Replace
3608 Engine Before Starting Engine
3608 Engine Cooling System Coolant Level - Check
3608 Engine Accessory Drive
3608 Engine Model View Illustrations
3608 Engine Safety Messages
3608 Engine Gauges and Indicators
Electronic Modular Control Panel II (EMCP II) Component Location - For 3412C PEEC Engines
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0001</B> Generator through <B>5N-0025</B> Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>102-2415</B> Generator through <B>108-3052</B> Generator
3034 Engine for Caterpillar Built Machines Camshaft Bearings - Remove
SR500 Generators Varistor - Test
3114, 3116, and 3126 Engines for Caterpillar Built Machines Camshaft - Remove
3034 Engine for Caterpillar Built Machines Camshaft Bearings - Install
SR500 Generators Winding - Test