Camshaft Bearings - Install
Installation Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 8S-2241     | Camshaft Bearing Tool Group     | 1     |
8H-0684 | Ratchet Wrench     | 1     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tool (A) in order to install the camshaft bearing in the cylinder block.
Note: A bearing is installed in the cylinder block for the number one journal of the camshaft.
Show/hide table
Illustration 1 | g00546333 |
Show/hide table
Illustration 2 | g00546238 |
- Install the camshaft bearing (1) in the cylinder block. Ensure that the oil holes in the camshaft bearing are aligned with the oil holes in the cylinder block.
- Perform a check of the camshaft bearing in six places in order to ensure that the diameter of the bearing is correct. Refer to Specification, "Camshaft" for more information.
End By: Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Caterpillar Information System:
3114, 3116, and 3126 Engines for Caterpillar Built Machines Camshaft - Remove
SR500 Generators Varistor - Test
3034 Engine for Caterpillar Built Machines Camshaft Bearings - Remove
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>102-2415</B> Generator through <B>108-3052</B> Generator
SR4 and SR4B Electric Power Generation Rewind Data Winding Data for <B>5N-0001</B> Generator through <B>5N-0025</B> Generator
Electronic Modular Control Panel II (EMCP II) Component Location - For 3412C PEEC Engines
3608 Engine Gauges and Indicators
3608 Engine Safety Messages
3608 Engine Model View Illustrations
3608 Engine Accessory Drive
G3304 and G3306 Engines Pressure Gauge - Engine Oil
3524B Engines for 797 and 797B Off-Highway Trucks Charging System
SR500 Generators Winding - Test
3608 Engine Cooling System Coolant (DEAC) - Change
Customer Communication Module (CCM) for Diesel Engines Display Description
Customer Communication Module (CCM) for Diesel Engines Engine Number - Program
Uninterruptible Power Supply (UPS) 250 General Information
G3304 and G3306 Engines Air Inlet and Exhaust System
Uninterruptible Power Supply (UPS) 250 Power Sources
C32 Petroleum Generator Sets Emissions Warranty Information
Customer Communication Module (CCM) for Diesel Engines Fault Identifiers
Uninterruptible Power Supply (UPS) 250 Circuit Descriptions
3512 Industrial Engine Emissions Certification Film
3512 Industrial Engine Fuel Injector - Inspect/Adjust