Fault Identifiers
The following chart contains the Fault Identifiers for PID's.
Show/hide table
| FAULT IDENTIFIERS (FID) | |||||||
|---|---|---|---|---|---|---|---|
| FID | Signed Byte | Unsigned Byte | Signed Word | Unsigned Word | Signed Long Word | Unsigned Long Word | Fault Description |
| 0 - 1 | $80 - $81 | $E0 - $E1 | $8000 - $8001 | $FFE0 - $FFE1 | $8000000 - $8000001 | $FFFFFFE0 $FFFFFFE1 | Not Used |
| 2 | $82 | $E2 |
$8002 | $FFE2 | $8000002 | $FFFFFFE2 | Data erratic, intermittent or incorrect |
| 3 | $83 | $E3 |
$8003 | $FFE3 | $8000003 | $FFFFFFE3 | Shorted high or open circuit |
| 4 | $84 | $E4 | $8004 | $FFE4 | $8000004 | $FFFFFFE4 | Shorted low |
| 5 | $85 | $E5 | $8005 | $FFE5 | $8000005 | $FFFFFFE5 | Open circuit or current below normal |
| 6 | $86 | $E6 | $8006 | $FFE6 | $8000006 | $FFFFFFE6 | Current above normal or grounded circuit |
| 7 | $87 | $E7 | $8007 | $FFE7 | $8000007 | $FFFFFFE7 | Not Used |
| 8 | $88 | $E8 | $8008 | $FFE8 | $8000008 | $FFFFFFE8 | Abnormal frequency, pulse width, or period |
| 9 | $89 | $E9 | $8009 | $FFE9 | $8000009 | $FFFFFFE9 | Abnormal update |
| 10 | $8A | $EA | $800A | $FFEA | $800000A | $FFFFFFEA | Not used |
| 11 | $8B | $EB | $800B | $FFEB | $800000B | $FFFFFFEB | Failure mode not identified |
| 12 | $8C | $EC | $800C | $FFEC | $800000C | $FFFFFFEC | Bad device or component |
| 13 - 15 | $8D - $8F | $ED - $EF | $800D- $800F | $FFED - $FFEF | $800000D - $800000F | $FFFFFFED - $FFFFFFEF | Not used |
| 16 | $90 | $F0 | $8010 | $FFF0 | $8000010 | $FFFFFFF0 | Parameter not available |
| 17 | $91 | $F1 | $8011 | $FFF1 | $8000011 | $FFFFFFF1 | Module not responding |
| 18 | $92 | $F2 | $8012 | $FFF2 | $800012 | $FFFFFFF2 | Sensor supply fault |
| 19 - 31 | $93 - $9F | $F3 - $FF | $8013 - $801F | $FFF3 - $FFFF | $8000013 $800001F | $FFFFFFF3 - $FFFFFFFF | Not used |
Caterpillar Information System:
C32 Petroleum Generator Sets Emissions Warranty Information
Uninterruptible Power Supply (UPS) 250 Power Sources
G3304 and G3306 Engines Air Inlet and Exhaust System
Uninterruptible Power Supply (UPS) 250 General Information
Customer Communication Module (CCM) for Diesel Engines Engine Number - Program
Customer Communication Module (CCM) for Diesel Engines Display Description
3608 Engine Cooling System Coolant (DEAC) - Change
SR500 Generators Winding - Test
3034 Engine for Caterpillar Built Machines Camshaft Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines Camshaft - Remove
SR500 Generators Varistor - Test
3034 Engine for Caterpillar Built Machines Camshaft Bearings - Remove
Uninterruptible Power Supply (UPS) 250 Circuit Descriptions
3512 Industrial Engine Emissions Certification Film
3512 Industrial Engine Fuel Injector - Inspect/Adjust
Customer Communication Module (CCM) for Diesel Engines Instruction Identifiers
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application 0071-14 PTO Shutdown Timer Occurrence (47)
Uninterruptible Power Supply (UPS) 250 Component Descriptions
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Has Early Wear
SR4 and SR4B Generators and Control Panels General Hazard Information
3406E, C-10 and C-12 On-highway Engines 0171-11 Ambient Air Temperature Data Lost
SR500 Generators Bearing (Ball) - Lubricate - Generator
SR4 HV and SR4B HV Generators Burn Prevention
3608 Engine Cooling System Coolant (ELC) - Change