Fuel Injector - Inspect/Adjust
附註檢查過引擎的汽門間隙後，方可執行此步驟。
Show/hide table
| 注意事項 |
|---|
|
在轉動曲軸前，必須將定時銷全部拆除，否則將導致氣缸體損壞。 需在開啟機軸或汽缸塊受損前自突軸輪移除定時插件。 |
依系統操作/測試與調整, "燃油系統"章節，檢查用於燃油噴射器間隙的調整。 必要時重新調整噴油器的間隙。
Caterpillar Information System:
3512 Industrial Engine Emissions Certification Film
Uninterruptible Power Supply (UPS) 250 Circuit Descriptions
Customer Communication Module (CCM) for Diesel Engines Fault Identifiers
C32 Petroleum Generator Sets Emissions Warranty Information
Uninterruptible Power Supply (UPS) 250 Power Sources
G3304 and G3306 Engines Air Inlet and Exhaust System
Uninterruptible Power Supply (UPS) 250 General Information
Customer Communication Module (CCM) for Diesel Engines Engine Number - Program
Customer Communication Module (CCM) for Diesel Engines Display Description
3608 Engine Cooling System Coolant (DEAC) - Change
SR500 Generators Winding - Test
3034 Engine for Caterpillar Built Machines Camshaft Bearings - Install
Customer Communication Module (CCM) for Diesel Engines Instruction Identifiers
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application 0071-14 PTO Shutdown Timer Occurrence (47)
Uninterruptible Power Supply (UPS) 250 Component Descriptions
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Has Early Wear
SR4 and SR4B Generators and Control Panels General Hazard Information
3406E, C-10 and C-12 On-highway Engines 0171-11 Ambient Air Temperature Data Lost
SR500 Generators Bearing (Ball) - Lubricate - Generator
SR4 HV and SR4B HV Generators Burn Prevention
3608 Engine Cooling System Coolant (ELC) - Change
SR4 and SR4B Generators and Control Panels Fire Prevention and Explosion Prevention
C-9 Engine for the 12H Motor Grader Engine Oil in Cooling System
3126B and 3126E On-highway Engines 0111-02 Coolant Level signal invalid (12)