Valve Lifter - Assemble
组装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
图 1 | g01212600 |
Show/hide table
图 2 | g01212691 |
- 如果拆下了原先的导向弹簧,将新的导向弹簧 (3) 和 (4) 安装到气门挺杆 (6) 和单体喷油器举升装置 (8) 上。
注: 如果已从气门挺杆上拆下导向弹簧,则必须再次使用导向弹簧。 如果已拆下了导向弹簧,务必安装新的导向弹簧。
- 当具有凹槽的一端向外时,安装嵌件 (2) 。 安装新的 O 形密封圈 (1) ,以将嵌件固定到位。
- 将气门挺杆 (6) 和单体喷油器举升装置 (8) 浸泡在干净的发动机油中。
- 将气门挺杆 (6) 安装在最初位置。 安装气门挺杆,以便导向弹簧处于正确的位置。
注: 压缩导向弹簧 (3) ,以便将气门挺杆 (6) 安装在导管 (5) 中。
- 安装单体喷油器举升装置 (8) 。
- 按照尺寸 (X) 安装气门挺杆和单体喷油器举升装置。 尺寸 (X) 为 118 ± 2 mm (4.6 ± 0.1 in).
End By: 安装气门挺杆组件。 请参阅 拆解和组装, "气门挺杆 - 安装"。
Caterpillar Information System:
3612 and 3616 Engines Valve Lifter - Disassemble
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
3612 and 3616 Engines Valve Lifter - Install
SR4 and SR4B Generators and Control Panels Before Starting Engine
3612 and 3616 Engines Valve Lifter - Remove
SR500 Generators Tools
3114, 3116, and 3126 Engines for Caterpillar Built Machines Cylinder Head - Remove
330B Excavator Machine System Specifications Recoil Spring
C-10 and C-12 Industrial Engines Electrical Ground Stud
3612 and 3616 Engines Rocker Arm - Assemble
3612 and 3616 Engines Rocker Arm - Disassemble
C-10 and C-12 Truck Engines Inlet Manifold
3126B and 3126E On-highway Engines Accelerator Pedal (Throttle) Position Sensor Circuit - Test
3056 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
SR4 and SR4B Generators and Control Panels Electronic Modular Control Panel II+ with Paralleling (EMCP II+P)
3612 and 3616 Engines Fuel Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
3612 and 3616 Engines Fuel Injector - Install
Caterpillar Monitoring System for Electronic Modular Control Panel CID 0102 FMI 08 Pressure Sensor (Boost) Abnormal Signal - Test
3003, 3013, 3014 and 3024 Industrial Engines Engaging the Driven Equipment
C-10 and C-12 Truck Engines Water Pump
3612 and 3616 Engines Cylinder Head - Remove
3618 Engine Crankshaft Main Bearings - Remove
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel Conservation Practices