330B Excavator Machine System Specifications Caterpillar


Recoil Spring

Usage:

330B L 1KS



Illustration 1g00639149

(1) 7Y-1874 Spring

Option A
Free length ... 909.9 mm (35.82 inch)
Outside diameter ... 252.0 mm (9.9 inch)
Option B
Free length ... 925.0 mm (36.42 inch)
Outside diameter ... 249.4 mm (9.82 inch)

(2) Apply 9S-3263 Thread Lock on threads of the bolts.

Dimension (B) ... 830.0 mm (32.68 inch)

Caterpillar Information System:

C-10 and C-12 Industrial Engines Electrical Ground Stud
3612 and 3616 Engines Rocker Arm - Assemble
3612 and 3616 Engines Rocker Arm - Disassemble
C-10 and C-12 Truck Engines Inlet Manifold
SR4 and SR4B Generators and Control Panels Caterpillar Monitoring System - For Generator Sets with Electromechanical Control Panels for Switchgear Conversion
C-10 and C-12 Truck Engines Air Compressor
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Diagnostic Codes
SR4 and SR4B Generators and Control Panels Electromechanical Control Panel for Switchgear Conversion
SR4 and SR4B Generators and Control Panels Electronic Modular Control Panel II (EMCP II)
C-10 and C-12 Truck Engines Accessory Drive (Air Compressor)
3612 and 3616 Engines Valve Mechanism - Install
SR4 and SR4B Generators and Control Panels Electronic Modular Control Panel II+ (EMCP II+)
3114, 3116, and 3126 Engines for Caterpillar Built Machines Cylinder Head - Remove
SR500 Generators Tools
3612 and 3616 Engines Valve Lifter - Remove
SR4 and SR4B Generators and Control Panels Before Starting Engine
3612 and 3616 Engines Valve Lifter - Install
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Ignition Keyswitch Circuit and Battery Supply Circuit - Test
3612 and 3616 Engines Valve Lifter - Disassemble
3612 and 3616 Engines Valve Lifter - Assemble
3126B and 3126E On-highway Engines Accelerator Pedal (Throttle) Position Sensor Circuit - Test
3056 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
SR4 and SR4B Generators and Control Panels Electronic Modular Control Panel II+ with Paralleling (EMCP II+P)
3612 and 3616 Engines Fuel Injector - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.