Swivel
Show/hide table
图 1 | g01723538 |
回转接头 (1) 密封 (2) 密封 (3) 油口 (4) 油口 (5) 油口 (6) 油口 (7) 转子 (8) 法兰 (9) 油口 (10) 壳体 (11) 盖 (12) 油口 (13) 排流口 (14) 护圈 (15) 旋转接头 (16) 油口 (17) 油口 (18) 油口 (19) 油口 (20) 孔口 (21) 油口 (22) 连杆 (23) 向前方向 |
Show/hide table
油口和回路的识别     | ||
---|---|---|
油口(壳体)     | 油口(转子)     | 回路     |
6     | 17     | 向右行驶(后退)     |
4     | 19     | 向右行驶(前进)     |
3     | 21     | 向左行驶(前进)     |
5     | 20     | 向左行驶(后退)     |
14     | 18     | 排放     |
11     | 16     | 行驶速度变换     |
回转接头 (15) 能实现两个功能。 回转接头 (15) 将上部结构的泵油输送到下部结构的行驶马达。 上部结构回转。 而下部结构不回转。 回转接头 (15) 将行驶马达的回油输送回液压油箱。
壳体 (10) 通过杆 (22) 限制在上部结构处。 杆 (22) 用作一个扭矩臂,以防止壳体 (10) 转动。 转子 (7) 用螺栓通过法兰 (8) 固定在下部结构上。 壳体 (10) 的油口与转子 (7) 的油口接通。 壳体 (10) 中的油道与转子 (7) 中的油道和油口接通。
壳体 (10) 和转子 (7) 的滑动表面之间配备了高压密封件 (2) 和低压密封件 (1) 。 密封 (2) 和 (1) 可防止油道之间漏油。
Caterpillar Information System:
315C Excavator Hydraulic System General Information
5110B Excavator Machine Systems Control Valve (Implement and Travel) - Disassemble
315C Excavator Fuel Inlet Screen - Clean
312C and 315C Excavators Tool Control System System 3: Relief Valve (Line) - Test and Adjust
365B and 365B Series II Excavators Hydraulic System Fan Motor (Hydraulic and Radiator Cooling) - Test - Measurement of Case Drain Oil
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Visual Inspection
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple
312C Excavator Engine Air Filter Secondary Element - Replace
311C U Excavator Hydraulic System Main Hydraulic System
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
5110B Excavator Machine Systems Swivel - Assemble
Product Identification Numbers (PIN) Location Guide Excavator (Track)
Instructions for the Use of the M300 Technician Software With a Laptop Computer{7620} Instructions for the Use of the M300 Technician Software With a Laptop Computer{7620}
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Disassemble
5110B Excavator Machine Systems Bucket - Remove and Install
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Disassemble
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Disassemble
Installation of the Blank Hooks{6530, 6700} Installation of the Blank Hooks{6530, 6700}
311C Excavator Machine System Specifications Hydraulic Control (Straight Travel)
2001/04/23 Proper Operation of Augers Will Prevent Bending Loads that Result in Component Damage and Failures {6282, 7000}
Installing and Operating the Generator{7000} Installing and Operating the Generator{7000}
5110B Excavator Machine Systems Boom - Remove and Install
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Assemble
311C Excavator Machine System Specifications Front Lines - Combined Function