General Information
Reference: For testing and adjusting of the hydraulic system, refer to Testing and Adjusting, " 315C and 315C L Excavators Hydraulic System".
Reference: For systems operation of the electronic control unit and electronic system, refer to Systems Operation/Testing and Adjusting, " 315C Excavators Engine and Pump Control".
Reference: For more information on specifications, refer to Specifications, " 315C and 315C L Excavators Machine System Specifications".
Reference: For more information on the hydraulic schematics, refer to Schematic, " 315C and 315C L Excavators Hydraulic System".
Reference: For more information on electrical schematics, refer to Schematic, " 315C and 315C L Excavators Electrical System".
Caterpillar Information System:
5110B Excavator Machine Systems Control Valve (Implement and Travel) - Disassemble
315C Excavator Fuel Inlet Screen - Clean
312C and 315C Excavators Tool Control System System 3: Relief Valve (Line) - Test and Adjust
365B and 365B Series II Excavators Hydraulic System Fan Motor (Hydraulic and Radiator Cooling) - Test - Measurement of Case Drain Oil
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Visual Inspection
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple
312C Excavator Engine Air Filter Secondary Element - Replace
311C U Excavator Hydraulic System Main Hydraulic System
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
5110B Excavator Machine Systems Swivel - Assemble
Product Identification Numbers (PIN) Location Guide Excavator (Track)
BA22, BA25 and BA30 Angling Brooms Brooms - BA25
315C Excavator Hydraulic System Swivel
Instructions for the Use of the M300 Technician Software With a Laptop Computer{7620} Instructions for the Use of the M300 Technician Software With a Laptop Computer{7620}
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Disassemble
5110B Excavator Machine Systems Bucket - Remove and Install
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Disassemble
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Disassemble
Installation of the Blank Hooks{6530, 6700} Installation of the Blank Hooks{6530, 6700}
311C Excavator Machine System Specifications Hydraulic Control (Straight Travel)
2001/04/23 Proper Operation of Augers Will Prevent Bending Loads that Result in Component Damage and Failures {6282, 7000}
Installing and Operating the Generator{7000} Installing and Operating the Generator{7000}
5110B Excavator Machine Systems Boom - Remove and Install
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Assemble