Track-Type Tractor
Show/hide table
 | |
| Illustration 1 | g00786900 |
The CE plate is located on the PIN Plate (1) when required.
PIN Plate (1) is located on the left front of the main frame near the operator compartment.
The serial number plate (2) for the engine is located on the top of the valve cover for the engine block.
The service information number plate (3) is located on the right front of the main frame near the operator compartment.
Caterpillar Information System:
5110B Excavator Machine Systems Swivel - Assemble
Product Identification Numbers (PIN) Location Guide Excavator (Track)
BA22, BA25 and BA30 Angling Brooms Brooms - BA25
BA22, BA25 and BA30 Angling Brooms Brooms - BA22
311C U Excavator Hydraulic System General Information
311C Excavator Machine System Specifications Stick - 2250 mm (7 ft 5 inch)
5110B Excavator Machine Systems Track Tension Cylinder - Install
365B and 365B Series II Excavators Hydraulic System Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
BA22, BA25 and BA30 Angling Brooms Brooms - BA30
Installation of the Blank Hooks{6001, 6129} Installation of the Blank Hooks{6001, 6129}
BP22 and BP25 Pick-Up Brooms Gerotor Motor (Broom)
315C Excavator Hydraulic System Return Hydraulic System
311C U Excavator Hydraulic System Main Hydraulic System
312C Excavator Engine Air Filter Secondary Element - Replace
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Visual Inspection
365B and 365B Series II Excavators Hydraulic System Fan Motor (Hydraulic and Radiator Cooling) - Test - Measurement of Case Drain Oil
312C and 315C Excavators Tool Control System System 3: Relief Valve (Line) - Test and Adjust
315C Excavator Fuel Inlet Screen - Clean
5110B Excavator Machine Systems Control Valve (Implement and Travel) - Disassemble
315C Excavator Hydraulic System General Information
315C Excavator Hydraulic System Swivel
Instructions for the Use of the M300 Technician Software With a Laptop Computer{7620} Instructions for the Use of the M300 Technician Software With a Laptop Computer{7620}
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Disassemble