Stick - 2250 mm (7 ft 5 inch)
Show/hide table
Illustration 1 | g00786824 |
(A) Stick cylinder (B) Right side view of boom |
Note: All bores must be free of paint. Coat all bores for pins with 3% molybdenum grease.
(1) 5I-3384 Pin
- Diameter of pin after chrome plating ... 59.86 ± 0.03 mm (2.357 ± 0.001 inch)
- Bore diameter for pin ... 60 mm (2.36 inch)
(2) 166-1481 Shim
- Quantity ... 2
- Thickness ... 2.00 ± 0.15 mm (0.079 ± 0.006 inch)
(3) 127-3913 Pin
- Diameter ... 59.86 mm (2.357 inch)
- Bore diameter for pin ... 60 mm (2.36 inch)
(4) 168-0062 Sleeve Bearing
- Quantity ... 2
- Outside diameter ... 95.112 ± 0.11 mm (3.7446 ± 0.004 inch)
- Inside diameter ... 80.250 ± 0.020 mm (3.1594 ± 0.001 inch)
- Install the bearing in the bearing bore. ... 9.5 ± 0.8 mm (0.37 ± 0.03 inch)
- Outside diameter ... 95.112 ± 0.11 mm (3.7446 ± 0.004 inch)
(5) 143-3835 Sleeve Bearing
- Quantity ... 2
- Outside diameter ... 75.085 ± .01 mm (2.9561 ± 0.0004 inch)
- Inside diameter ... 60.13 to 60.20 mm (2.3671 to 2.37 inch)
- Install the bearing in the bearing bore. ... 5.5 ± .8 mm (0.22 ± 0.03 inch)
- Outside diameter ... 75.085 ± .01 mm (2.9561 ± 0.0004 inch)
(6) 189-3870 Sleeve Bearing
- Quantity ... 2
- Outside diameter ... 80.140 ± 0.013 mm (3.1551 ± 0.0005 inch)
- Inside diameter ... 65.19 mm (2.567 inch)
- Install the bearing in the bearing bore. ... 5.5 ± .8 mm (0.22 ± 0.03 inch)
- Outside diameter ... 80.140 ± 0.013 mm (3.1551 ± 0.0005 inch)
(7) Lubricate the sealing lip slightly with the lubricant that is being sealed.
Caterpillar Information System:
5110B Excavator Machine Systems Track Tension Cylinder - Install
365B and 365B Series II Excavators Hydraulic System Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
BA22, BA25 and BA30 Angling Brooms Brooms - BA30
Installation of the Blank Hooks{6001, 6129} Installation of the Blank Hooks{6001, 6129}
BP22 and BP25 Pick-Up Brooms Gerotor Motor (Broom)
315C Excavator Hydraulic System Return Hydraulic System
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Install - If Equipped
315C Excavator Hydraulic System Swing Drive
5110B Excavator Machine Systems Swivel - Disassemble
315C Excavator Hydraulic System Check Valve (Return Makeup) - Slow Return Check Valve
3126B Engines for Caterpillar Built Machines Fuel Transfer Pump - Remove - If Equipped
315C Excavator Hydraulic System Hydraulic Oil Cooler
311C U Excavator Hydraulic System General Information
BA22, BA25 and BA30 Angling Brooms Brooms - BA22
BA22, BA25 and BA30 Angling Brooms Brooms - BA25
Product Identification Numbers (PIN) Location Guide Excavator (Track)
5110B Excavator Machine Systems Swivel - Assemble
Product Identification Numbers (PIN) Location Guide Track-Type Tractor
311C U Excavator Hydraulic System Main Hydraulic System
312C Excavator Engine Air Filter Secondary Element - Replace
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Visual Inspection
365B and 365B Series II Excavators Hydraulic System Fan Motor (Hydraulic and Radiator Cooling) - Test - Measurement of Case Drain Oil
312C and 315C Excavators Tool Control System System 3: Relief Valve (Line) - Test and Adjust