Grapple - Disassemble
Removal Procedure (Jaw)
Show/hide table
| VPG-45 | ||
|---|---|---|
| Part Number | Part Name | Weight |
| 169-4411 | Upper jaw | 803 kg (1770 lb) |
| 169-4410 | Lower jaw | 1002 kg (2209 lb) |
| 169-4413 | Pin (Jaws) | 52 kg (115 lb) |
Show/hide table
 | |
| Illustration 1 | g00568831 |
Note: Refer to Table 1 for the weights of the components.
- Attach a suitable lifting device to lifting eye (1) on the upper jaw of the Mechanical Grapple.
- Remove the 2 nuts and remove the bolt that secures pin (2) .
Show/hide table
 | |
| Illustration 2 | g00726853 |
- Carefully slide pin (2) from the housing.
- Lift the upper jaw from the housing.
Removal Procedure (Push Bar)
Show/hide table
| VPG-45 | ||
| Part Number | Part Name | Weight |
| 169-4412 | Push Bar | 139 kg (306 lb) |
| 169-4405 | Pin (Push Bar to Lower Jaw) | 28 kg (62 lb) |
| 169-3464 | Pin (Push Bar to Stick Bracket) | 38 kg (84 lb) |
Show/hide table
 | |
| Illustration 3 | g00726196 |
Note: Refer to Table 2 for the weights of the components.
- In order to remove push bar (3) from the lower jaw of the Mechanical Grapple, remove bolt (5) and 2 nuts (6) from the end of pin (4) .
- Carefully slide pin (4) from the housing.
- Remove push bar (3) from the Mechanical Grapple.
Caterpillar Information System:
5110B Excavator Machine Systems Bucket - Remove and Install
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Disassemble
Instructions for the Use of the M300 Technician Software With a Laptop Computer{7620} Instructions for the Use of the M300 Technician Software With a Laptop Computer{7620}
315C Excavator Hydraulic System Swivel
315C Excavator Hydraulic System General Information
5110B Excavator Machine Systems Control Valve (Implement and Travel) - Disassemble
315C Excavator Fuel Inlet Screen - Clean
312C and 315C Excavators Tool Control System System 3: Relief Valve (Line) - Test and Adjust
365B and 365B Series II Excavators Hydraulic System Fan Motor (Hydraulic and Radiator Cooling) - Test - Measurement of Case Drain Oil
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Visual Inspection
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple
312C Excavator Engine Air Filter Secondary Element - Replace
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Disassemble
Installation of the Blank Hooks{6530, 6700} Installation of the Blank Hooks{6530, 6700}
311C Excavator Machine System Specifications Hydraulic Control (Straight Travel)
2001/04/23 Proper Operation of Augers Will Prevent Bending Loads that Result in Component Damage and Failures {6282, 7000}
Installing and Operating the Generator{7000} Installing and Operating the Generator{7000}
5110B Excavator Machine Systems Boom - Remove and Install
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Assemble
311C Excavator Machine System Specifications Front Lines - Combined Function
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Assemble
VPG-25, VPG-35, VPG-45 and VPG-55 Work Tools Grapple - Assemble
322C Excavator Machine System Specifications Drain Line (Work Tool)
315C Excavator Hydraulic System Pump Control (Main Hydraulic) - Main Pump Regulator