Shipping the Work Tool
Select an appropriate pallet in order to carry the work tool. Select an appropriate pallet in order to protect the components of the work tool.
- Place the trencher on a pallet. Refer to the removal procedure in Operation and Maintenance Manual, "Work Tool Installation".
- Secure the hydraulic lines to the trencher. If protective caps are available, install protective caps over the quick disconnect couplings.
- Use tie-downs to secure the trencher to the pallet. Refer to Operation and Maintenance Manual, "Lifting and Tying Down the Work Tool" for tie-down locations.
Caterpillar Information System:
T9 Trencher Serial Number and EU's CE Plate Location
T9 Trencher Safety Signs and Labels
T9 Trencher Operating Technique Information
345B Series II Material Handler Condenser (Refrigerant) - Clean
2000/04/17 New Engine Software Increases the Parameters That Indicate High Fuel Temperature {7620}
T9 Trencher Model View Illustrations
T9 Trencher Maintenance Parts List
3512B Petroleum Engine Radiator - Clean
345B Series II Material Handler Boom Base Pins - Lubricate
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options General Information (All Except SR4B for 3500 Engines)
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Remove
T9 Trencher Maintenance Interval Schedule
H140CS and H160CS Hydraulic Hammers Hydraulic Accumulator - Remove
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic System Control Valve (Straight Travel)
T9 Trencher Work Tool Operation
345B Series II Material Handler Cooling System Coolant (ELC) - Change
T9 Trencher Transport Position
T9 Trencher Walk-Around Inspection
320C Excavator Machine Systems Boom Bearings and Seals - Remove and Install
5110B Excavator Electronic Systems Guide Related Components
345B Series II Material Handler Cooling System Coolant Extender (ELC) - Add
5110B Excavator Electronic Systems Guide Location of Relays
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Hydraulic Hammer - Disassemble - H195
365B, 365B Series II, 365BL, 365BL Series II, 385B and 5090B Excavators Vital Information Management System (VIMS) Liquid Level Switch (Engine Coolant)