Boom Base Pins - Lubricate
Note: Caterpillar recommends the use of 5% molybdenum grease for lubricating the boom linkage. Refer to Special Publication, SEBU6250, "Caterpillar Machine Fluids Recommendations" for more information on molybdenum grease.
When the boom pin is replaced, lubricate the new boom pin.
Show/hide table
Illustration 1 | g01863373 |
- Park the machine on a level surface and lower the work tool to the ground.
Show/hide table
Illustration 2 g00537172 Typical example
(1) Vent plug
(2) FittingNote: Vent plug (1) and fitting (2) are on the base of the boom.
- Remove vent plug (1).
- Apply lubricant through fitting (2) until lubricant comes out of the plug hole.
- Install vent plug (1).
Caterpillar Information System:
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options General Information (All Except SR4B for 3500 Engines)
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Remove
T9 Trencher Maintenance Interval Schedule
T9 Trencher Lifting and Tying Down the Work Tool
2000/04/03 A Special Instruction is Now Available for Installing Travel Alarms {7429}
T9 Trencher Frame Slide Bar (Upper and Lower) - Lubricate
T9 Trencher Chain Teeth - Inspect/Replace
T9 Trencher Chain - Inspect/Adjust
Rework Procedure at Bucket Mounting Pins for Teardrop Pins{6108, 6503, 6513} Rework Procedure at Bucket Mounting Pins for Teardrop Pins{6108, 6503, 6513}
T9 Trencher Caterpillar Reference Material
T9 Trencher Caterpillar Approved Machines
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Lifting Bracket
3512B Petroleum Engine Radiator - Clean
T9 Trencher Maintenance Parts List
T9 Trencher Model View Illustrations
2000/04/17 New Engine Software Increases the Parameters That Indicate High Fuel Temperature {7620}
345B Series II Material Handler Condenser (Refrigerant) - Clean
T9 Trencher Operating Technique Information
T9 Trencher Safety Signs and Labels
T9 Trencher Serial Number and EU's CE Plate Location
T9 Trencher Shipping the Work Tool
H140CS and H160CS Hydraulic Hammers Hydraulic Accumulator - Remove
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic System Control Valve (Straight Travel)
T9 Trencher Work Tool Operation