Model View Illustrations
Show/hide table
 | |
| Illustration 1 | g00699531 |
(1) Crumber arm (if equipped) (2) Chain and teeth (3) Boom (4) Frame mounting bracket (5) Hydraulic hoses (6) Skid plate (7) Gerotor motor (8) Diverter valve | |
Show/hide table
 | |
| Illustration 2 | g00699533 |
Show/hide table
| T9 TRENCHER | |
| Approximate Weight of the Trencher | 465 kg (1025 lb) |
| Maximum Width of the Trencher while the Boom is Shifted Completely to the Right | 1854 mm (73.0 inches) |
| Maximum Length of the Trencher | 2066 mm (81.3 inches) |
| Maximum Cutting Depth | 1219 mm (48 inches) |
| Range of Hydraulic Oil Pressure | 14500 to 22700 kPa (2100 to 3300 psi) |
| Range of Hydraulic Oil Flow | 42 to 83 L/min (11 to 22 US gpm) |
Caterpillar Information System:
T9 Trencher Maintenance Parts List
3512B Petroleum Engine Radiator - Clean
345B Series II Material Handler Boom Base Pins - Lubricate
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options General Information (All Except SR4B for 3500 Engines)
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Remove
T9 Trencher Maintenance Interval Schedule
T9 Trencher Lifting and Tying Down the Work Tool
2000/04/03 A Special Instruction is Now Available for Installing Travel Alarms {7429}
T9 Trencher Frame Slide Bar (Upper and Lower) - Lubricate
T9 Trencher Chain Teeth - Inspect/Replace
T9 Trencher Chain - Inspect/Adjust
Rework Procedure at Bucket Mounting Pins for Teardrop Pins{6108, 6503, 6513} Rework Procedure at Bucket Mounting Pins for Teardrop Pins{6108, 6503, 6513}
2000/04/17 New Engine Software Increases the Parameters That Indicate High Fuel Temperature {7620}
345B Series II Material Handler Condenser (Refrigerant) - Clean
T9 Trencher Operating Technique Information
T9 Trencher Safety Signs and Labels
T9 Trencher Serial Number and EU's CE Plate Location
T9 Trencher Shipping the Work Tool
H140CS and H160CS Hydraulic Hammers Hydraulic Accumulator - Remove
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic System Control Valve (Straight Travel)
T9 Trencher Work Tool Operation
345B Series II Material Handler Cooling System Coolant (ELC) - Change
T9 Trencher Transport Position
T9 Trencher Walk-Around Inspection