Condenser (Refrigerant) - Clean
Show/hide table
NOTICE |
---|
If excessively dirty, clean condenser with a brush. To prevent damage or bending of the fins, do not use a stiff brush. Repair the fins if found defective. |
Show/hide table
Illustration 1 | g00696518 |
- Open the access door on the left side of the machine.
- Inspect the condenser for debris. Clean the condenser, if necessary.
Show/hide table
Illustration 2 | g00537515 |
Typical example |
- Use clean water to wash off all dust and dirt from the condenser.
- Close the access door.
Caterpillar Information System:
2000/04/17 New Engine Software Increases the Parameters That Indicate High Fuel Temperature {7620}
T9 Trencher Model View Illustrations
T9 Trencher Maintenance Parts List
3512B Petroleum Engine Radiator - Clean
345B Series II Material Handler Boom Base Pins - Lubricate
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options General Information (All Except SR4B for 3500 Engines)
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Remove
T9 Trencher Maintenance Interval Schedule
T9 Trencher Lifting and Tying Down the Work Tool
2000/04/03 A Special Instruction is Now Available for Installing Travel Alarms {7429}
T9 Trencher Frame Slide Bar (Upper and Lower) - Lubricate
T9 Trencher Chain Teeth - Inspect/Replace
T9 Trencher Operating Technique Information
T9 Trencher Safety Signs and Labels
T9 Trencher Serial Number and EU's CE Plate Location
T9 Trencher Shipping the Work Tool
H140CS and H160CS Hydraulic Hammers Hydraulic Accumulator - Remove
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic System Control Valve (Straight Travel)
T9 Trencher Work Tool Operation
345B Series II Material Handler Cooling System Coolant (ELC) - Change
T9 Trencher Transport Position
T9 Trencher Walk-Around Inspection
320C Excavator Machine Systems Boom Bearings and Seals - Remove and Install
5110B Excavator Electronic Systems Guide Related Components