Serial Number and EU's CE Plate Location
Caterpillar products such as motorized work tools that are not designed for an operator to ride are identified by serial numbers.
For quick reference, record the identification numbers in the spaces that are provided below the illustration. The serial number plate is located on the upper right hand corner on the back of the mounting bracket. The CE mark is located on the serial number plate.
Show/hide table
 | |
| Illustration 1 | g00699637 |
Trencher Serial Number____________________
Model____________________
Approximate Weight____________________
Year of Manufacture____________________
Caterpillar Information System:
T9 Trencher Safety Signs and Labels
T9 Trencher Operating Technique Information
345B Series II Material Handler Condenser (Refrigerant) - Clean
2000/04/17 New Engine Software Increases the Parameters That Indicate High Fuel Temperature {7620}
T9 Trencher Model View Illustrations
T9 Trencher Maintenance Parts List
3512B Petroleum Engine Radiator - Clean
345B Series II Material Handler Boom Base Pins - Lubricate
Connection Diagrams: SR4 and SR4B Generators, Voltage Regulators, Options General Information (All Except SR4B for 3500 Engines)
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Remove
T9 Trencher Maintenance Interval Schedule
T9 Trencher Lifting and Tying Down the Work Tool
T9 Trencher Shipping the Work Tool
H140CS and H160CS Hydraulic Hammers Hydraulic Accumulator - Remove
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic System Control Valve (Straight Travel)
T9 Trencher Work Tool Operation
345B Series II Material Handler Cooling System Coolant (ELC) - Change
T9 Trencher Transport Position
T9 Trencher Walk-Around Inspection
320C Excavator Machine Systems Boom Bearings and Seals - Remove and Install
5110B Excavator Electronic Systems Guide Related Components
345B Series II Material Handler Cooling System Coolant Extender (ELC) - Add
5110B Excavator Electronic Systems Guide Location of Relays
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Hydraulic Hammer - Disassemble - H195