Related Components
Note: The orientation of the right side of the machine is determined by the viewpoint of the operator while the operator is seated in the cab.
User Define Shutdown Connector
Show/hide table
Illustration 1 | g00696623 |
(1) User define shutdown connector |
The user define shutdown connector is located behind the fuel tank below the electronics bay.
Travel Alarm
Show/hide table
Illustration 2 | g00696628 |
(1) Travel alarm |
The travel alarm is located in the engine compartment.
Fuse Panel
Show/hide table
Illustration 3 | g00696637 |
(1) Fuse panel |
The fuse panel is located in the cab on the left hand console.
Auxiliary Starting Receptacle
Show/hide table
Illustration 4 | g00696644 |
(1) Auxiliary starting receptacle |
The auxiliary starting receptacle is located next to the disconnect switch.
Service Connector
Show/hide table
Illustration 5 | g00696667 |
(1) Service connector |
The service connector is located in the cab on the side of the Caterpillar Monitoring System.
Caterpillar Information System:
320C Excavator Machine Systems Boom Bearings and Seals - Remove and Install
T9 Trencher Walk-Around Inspection
T9 Trencher Transport Position
345B Series II Material Handler Cooling System Coolant (ELC) - Change
T9 Trencher Work Tool Operation
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic System Control Valve (Straight Travel)
H140CS and H160CS Hydraulic Hammers Hydraulic Accumulator - Remove
T9 Trencher Shipping the Work Tool
T9 Trencher Serial Number and EU's CE Plate Location
T9 Trencher Safety Signs and Labels
T9 Trencher Operating Technique Information
345B Series II Material Handler Condenser (Refrigerant) - Clean
345B Series II Material Handler Cooling System Coolant Extender (ELC) - Add
5110B Excavator Electronic Systems Guide Location of Relays
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Hydraulic Hammer - Disassemble - H195
365B, 365B Series II, 365BL, 365BL Series II, 385B and 5090B Excavators Vital Information Management System (VIMS) Liquid Level Switch (Engine Coolant)
345B, 345B Series II and W345B Series II Excavators Machine Systems Swing Motor - Assemble - Series II
345B, 345B Series II and W345B Series II Excavators Machine Systems Swing Motor - Disassemble - Series II
W345B Series II Material Handler Hydraulic System Oil Filter (Return) - Replace
320C Excavator Machine Systems Main Control Valve - Remove - Equipped with F1 and F4 Auxiliary Control Valves
320C Excavator Machine Systems Main Control Valve - Install - Equipped with F1 and F4 Auxiliary Control Valves
320C Excavator Machine Systems Cab - Remove
320C Excavator Machine Systems Cab - Install
320C Excavator Machine Systems Fuel Tank - Remove