315C Excavator Caterpillar


Hydraulic Lockout Control

Usage:

315C AKE



Ilustrasi 1g00811229

Tuas kontrol penguncian hidrolik terletak di samping kiri konsol kiri.


Terkunci - Gerakkan tuas/pedal travel dan gerakkan joystick ke posisi TAHAN (tengah). Gerakkan tuas kontrol penguncian hidrolik ke arah belakang ke posisi TERKUNCI. Hal ini akan menyebabkan semua alat kontrol hidrolik yang terpasang dari pabrik tidak dapat dioperasikan.

Catatan: Pastikan bahwa tuas kontrol penguncian hidrolik berada pada posisi TERKUNCI sebelum menghidupkan engine. Apabila tuas berada pada posisi TIDAK TERKUNCI, kunci kontak engine tidak akan berfungsi.




Ilustrasi 2g00811329


Tidak Terkunci - Gerakkan tuas kontrol penguncian hidrolik ke arah depan ke posisi TIDAK MENGUNCI. Hal ini akan menyebabkan semua alat kontrol hidrolik yang terpasang dari pabrik dapat dioperasikan.

Caterpillar Information System:

315C Excavator Fine Swing Control - If Equipped
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Control Valve - Install
3408E and 3412E Engines for Caterpillar Built Machines Water Pump - Test
P16, P20, P25, P28, P40 and P60 Pulverizers Rotary Manifold - Assemble
P16, P20, P25, P28, P40 and P60 Pulverizers Rotary Manifold - Disassemble
P16, P20, P25, P28, P40 and P60 Pulverizers Rotary Manifold - Assemble
315C Excavator Automatic Engine Speed Control (AEC)
M318 and M320 Excavators Power Train Downshift Inhibitor - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Gear Group (Front) - Time
988G Wheel Loader Electrohydraulic System Electronic Control Module (ECM) - Flash Program
2000/03/27 Improved Water Connection Group {1393}
3126B Engines Engine Speed - Check
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Check Valve - Remove - 115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, and 180/H180s
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Check Valve - Install - 115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, and 180/H180s
325D and 329D Excavators Joystick Controls Alternate Patterns
115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, 180/H180s and H195 Hydraulic Hammers Check Valve - Disassemble - 115/H115s, 120/H120s/H120Cs, 130/H130s, 140/H140s, 160/H160s, and 180/H180s
325C and 325C L Excavator Fuel Tank Shutoff and Drain Control
313B ExcavatorEngine Supplement Engine and Main Hydraulic Pump - Remove
313B ExcavatorEngine Supplement Engine and Main Hydraulic Pump - Install
2004/09/06 Product Support Literature for Custom Product Machines {0374}
303.5 Mini Hydraulic Excavator Machine Systems Fuel Tank - Remove
303.5 Mini Hydraulic Excavator Pilot and Travel Speed Manifold
A26 Auger Work Tool Systems Auger Planetary - Disassemble
2000/03/20 New 12 Volt AM/FM Radios Are Available {7338}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.