Cutter
Show/hide table
Illustration 1 | g00537537 |
Show/hide table
Illustration 2 | g00537538 |
(1) Apply 4C-4030 Thread Lock Compound to the nuts before assembling the cutters.
(A) Distance between cutters ... 0.2 - 0.5 mm (0.008 - 0.02 inch)
Caterpillar Information System:
3306C Engines for Caterpillar Built Machines Accessory Drive Gears (Rear)
S3 Shear and CR3 Crusher Housing
S3 Shear and CR3 Crusher Crushing Arm
307B Excavator Machine Systems Cab Heater - Remove
307B Excavator Machine Systems Gear Pump (Pilot) - Disassemble
BA18 Angle Broom Broom Angle Adjustment
LR15 and LR18 Landscape Rakes Safety Signs and Labels
LR15 and LR18 Landscape Rakes Walk-Around Inspection
S25/S225, S30/S230, S40/S240, S50/S250, S80/S280 and S130/S2130 Demolition and Scrap Shears Standard Torque for Inch Fasteners
PC3 and PC4 Cold Planers Mounting Plate For Frame (Rear) - Lubricate
A19 Auger Gearbox Oil Level - Check
A19 Auger Gearbox Oil - Change
322B, 322B L, 325B and 325B L Excavators Condenser (Refrigerant) - Clean
315B L, 317B L and 317B LN Excavators Attachment Hydraulic System Combined Function Hydraulic Operation - Ball Valves
3046 Engine For Caterpillar Built Machines Crankshaft - Remove
307B Excavator Machine Systems Counterweight - Remove and Install
325B Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
5230 Excavator Hydraulic System Cooling System
315B L, 317B L and 317B LN Excavators Attachment Hydraulic System Combined Function Hydraulic Operation - Front Lines Group
Caterpillar Monitoring System Service Mode
325B Excavator Machine Systems Solenoid Valve (Proportional Reducing) - Remove and Install
3046 Engine For Caterpillar Built Machines Crankshaft - Install
320B Excavator Hydraulic System General Information
320B Excavator Hydraulic System Pump Hydraulic System