Crushing Arm
Show/hide table
Illustration 1 | g00537356 |
(A) Diameter of new pin bore ... 65.000 + 0.004 - 0.015 mm (2.5591 + 0.0002 - 0.0006 inch)
(B) Diameter of new pin bore ... 75.000 + 0.004 - 0.015 mm (2.9527 + 0.0002 - 0.0006 inch)
Caterpillar Information System:
307B Excavator Machine Systems Cab Heater - Remove
307B Excavator Machine Systems Gear Pump (Pilot) - Disassemble
BA18 Angle Broom Broom Angle Adjustment
LR15 and LR18 Landscape Rakes Safety Signs and Labels
LR15 and LR18 Landscape Rakes Walk-Around Inspection
S25/S225, S30/S230, S40/S240, S50/S250, S80/S280 and S130/S2130 Demolition and Scrap Shears Standard Torque for Inch Fasteners
PC3 and PC4 Cold Planers Mounting Plate For Frame (Rear) - Lubricate
A19 Auger Gearbox Oil Level - Check
A19 Auger Gearbox Oil - Change
BP15 Pickup Broom Safety Signs and Labels
BP15 Pickup Broom Walk-Around Inspection
BP15 Pickup Broom Transport Position
S3 Shear and CR3 Crusher Housing
3306C Engines for Caterpillar Built Machines Accessory Drive Gears (Rear)
S3 Shear and CR3 Crusher Cutter
322B, 322B L, 325B and 325B L Excavators Condenser (Refrigerant) - Clean
315B L, 317B L and 317B LN Excavators Attachment Hydraulic System Combined Function Hydraulic Operation - Ball Valves
3046 Engine For Caterpillar Built Machines Crankshaft - Remove
307B Excavator Machine Systems Counterweight - Remove and Install
325B Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
5230 Excavator Hydraulic System Cooling System
315B L, 317B L and 317B LN Excavators Attachment Hydraulic System Combined Function Hydraulic Operation - Front Lines Group
Caterpillar Monitoring System Service Mode
325B Excavator Machine Systems Solenoid Valve (Proportional Reducing) - Remove and Install