Housing
Show/hide table
Illustration 1 | g00542310 |
Pin Bore
(A) Diameter of new pin bore ... 60.000 + 0.046 - 0.000 mm (2.3622 + 0.0018 - 0.000 inch)
Bolts
(1) Tighten the 12 095-9806 Bolts to the following torque. ... 270 ± 40 N·m (200 ± 30 lb ft)
Note: Apply 4C-4030 Thread Lock Compound to the 095-9806 Bolts before installing.
Pin Diameter
(B) Diameter of a new 155-5759 Pin ... 59.955 ± 0.015 mm (2.3604 ± 0.0006 inch)
Bushing
(C) Outer diameter of new 159-3115 Bushings ... 75.000 + 0.030 - 0.011 mm (2.953 + 0.001 - 0.0004 inch)
(D) Inner diameter of new 159-3115 Bushings ... 60.000 + 0.046 - 0.000 mm (2.362 + 0.0018 - 0.000 inch)
Spacer
(E) Thickness of new 155-5761 Spacer ... 12.1 - 0.1 mm (0.476 - 0.004 inch)
Caterpillar Information System:
S3 Shear and CR3 Crusher Crushing Arm
307B Excavator Machine Systems Cab Heater - Remove
307B Excavator Machine Systems Gear Pump (Pilot) - Disassemble
BA18 Angle Broom Broom Angle Adjustment
LR15 and LR18 Landscape Rakes Safety Signs and Labels
LR15 and LR18 Landscape Rakes Walk-Around Inspection
S25/S225, S30/S230, S40/S240, S50/S250, S80/S280 and S130/S2130 Demolition and Scrap Shears Standard Torque for Inch Fasteners
PC3 and PC4 Cold Planers Mounting Plate For Frame (Rear) - Lubricate
A19 Auger Gearbox Oil Level - Check
A19 Auger Gearbox Oil - Change
BP15 Pickup Broom Safety Signs and Labels
BP15 Pickup Broom Walk-Around Inspection
3306C Engines for Caterpillar Built Machines Accessory Drive Gears (Rear)
S3 Shear and CR3 Crusher Cutter
322B, 322B L, 325B and 325B L Excavators Condenser (Refrigerant) - Clean
315B L, 317B L and 317B LN Excavators Attachment Hydraulic System Combined Function Hydraulic Operation - Ball Valves
3046 Engine For Caterpillar Built Machines Crankshaft - Remove
307B Excavator Machine Systems Counterweight - Remove and Install
325B Excavator Machine Systems Accumulator (Hydraulic Pilot) - Remove and Install
5230 Excavator Hydraulic System Cooling System
315B L, 317B L and 317B LN Excavators Attachment Hydraulic System Combined Function Hydraulic Operation - Front Lines Group
Caterpillar Monitoring System Service Mode
325B Excavator Machine Systems Solenoid Valve (Proportional Reducing) - Remove and Install
3046 Engine For Caterpillar Built Machines Crankshaft - Install