Make sure that all of the safety signs are legible. Clean the safety signs or replace the safety signs if you cannot read the words. Replace the illustrations if the illustrations are not legible. When you clean the safety signs, use a cloth, water and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety signs. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety sign. Loose adhesive will allow the safety sign to fall. Replace any safety sign that is damaged, or missing. If a safety sign is attached to a part that is replaced, install a safety sign on the replacement part. Any Caterpillar dealer can provide new safety signs.
Operation
Illustration 1 | g00550767 |
This warning label is located on the back of the mounting bracket by the serial number plate.
g00543934 |
Do not operate or work on this machine or work tool unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals and Owner's Manuals. Failure to follow the instructions or heed the warnings could result in injury or death. Contact your Caterpillar dealer for replacement manuals. Proper care is your responsibility. |
Crushing
Illustration 2 | g00550771 |
This warning label is located on both sides of the rake housing.
g00547368 |
No clearance for person in this area during operation. Severe injury or death from crushing could occur. Stay away from the work tool while it is in operation. |
Cutting
Illustration 3 | g00556175 |
This warning label is located on the top of the rake housing near the front edge.
g00544005 |
Stay away from the work tool while it is in operation. Severe injury or death from being cut by the work tool could occur. |
Flying Objects
Illustration 4 | g00556176 |
This warning label is located on the top of the rake housing near the front edge.
g00544006 |
Stay clear of this work tool during operation. Flying objects from this work tool could result in injury or death. |