Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1P-0510 | Driver Group | 1 |
Start By:
- Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1), cover (2), gasket (3), spring (4), and valve spool (5) from the engine oil pump.
Show/hide table
Illustration 3 g00591932 - Remove cover assembly (6) and the gasket from the engine oil pump.
Show/hide table
Illustration 4 g00591936 - Remove cover assembly (7) from the engine oil pump.
Show/hide table
Illustration 5 g00591962 - Use Tooling (A) and a suitable press to remove bearings (8) from cover assembly (7).
Show/hide table
Illustration 6 g00591963 - Remove shaft assemblies (10) from engine oil pump (9).
Show/hide table
Illustration 7 g00591964 - Inspect gears (11) for wear and for defects.
Show/hide table
Illustration 8 g00591965 - Use Tooling (A) and a suitable press to remove bearings (12) from engine oil pump (9).
Illustration 1 | g00591928 |
Illustration 2 | g00591930 |
Personal injury can result from parts and/or covers under spring pressure. Spring force will be released when covers are removed. Be prepared to hold spring loaded covers as the bolts are loosened. |